INTEGRATED CONTROLLER FOR TEMPERATURE AND HUMIDITY
The iGS-110 is the ideal controller to manage both temperature and humidity at the same time. With day/night detection and its different operating modes, you will manage your climate in any way you wish. The iGS-110 is a smart device that provides you with information on the performance of your equipment allowing you to optimize your configuration.
The controller has two separate auxiliary outputs for equipment correcting the temperature and relative humidity. The output controlling the temperature allows cooling, heating, or cooling and dehumidifying. The output for relative humidity helps to humidify or dehumidify. The controller will automatically adjust its operating differential to keep conditions closest to temperature or relative humidity set points.
- Temperature precise sensor: ±1.8°F (±1°C)
- Adjustable separate set points for day and night
- Relative humidity precise sensor: ±3.5% RH
- Adjustable operation priority and shutoff additional delay
Strategies To Garden Without CO2 Enrichment
The two auxiliary outputs can be configured independently according to the temperature or humidity control mode For example, with cooler and dryer air outside, the fresh air intake and CO2, cooling and dehumidification can be provided by ventilation controlled by the 1st output, while the 2th output can control heating or humidification.
- 1 outlet controlling CO2 equipment
- 1 auxiliary outlet for climate control
Control Temperature Or Humidity With Highest Priority And CO2 Enrichment
Plug a power strip in an auxiliary outlet of the temperature and humidity controller (iGS-110) and plug the temperature or humidity prioritized equipment and the iLS120-OFF sense cord. Feed the iLS120-OFF in different circuit and plug in a CO2 controller (iGS-061 or iGS-100) to manage CO2 enrichment equipment.
- 1 auxiliary outlet for temperature control
- 1 auxiliary outlet for RH control
To increase your cooling/heating and humidifying/dehumidifying capacity, plug an iLS120-ON to auxiliary outlets to control additional equipment on different circuit (adds 15 A, 120 V), or a load switcher box iLS4-121, iLS4-121s or iLS4-241 to control up to 8000 W of equipment (4 outlets up to 15 A, 120 V or 240 V). It can also control large capacity air conditioning unit through an iGS-DCS relay (other voltage then 110-120 V).
- One IGS-25 power boxes (2 outputs)
- 120 V, 15 A, 2 HP load capacity
Integrated Controller Yes Digital Display Yes Info, Error or Alarm Messages Yes Day/Night Detection Photocell Day and Night Setpoints Yes Adjustable Operation Priority Yes Performance Analysis Temperature or RH Control Self Audit of Controller Errors Yes Data Log Last 24 Hours Integrated Fan for Air Sampling Magnetic levitation sleeve bearing, 7 cfm
Auxiliary Devices Control
Controlled Actions Heating or Cooling, and Humidifying or Dehumidifying Controlled Auxiliary Outputs iGS-25 (2 auxiliary outlets) Simultaneously Controlled Equipment 2 (temperature and for RH Control)
Adjustable Restart Delay Yes
Temperature Display Yes Temperature Sensor Accuracy ±1.8°F (±1°C) Temperature Sensor Range -4 °F to +122 (-20 °C to +50 °C) Adjustable Temperature Setpoint Yes Temperature Differential Fixed or dynamic Adjustable Temperature Differential Yes Controlled Equipment for Temperature Heater or Air Conditioner or Fans
RH Display Yes RH Sensor accuracy ± 3,5 % RH RH Sensor Range 0 - 100 % RH Adjustable RH Setpoint Yes RH Differential Fixed or Dynamic Adjustable RH Differential Yes Controlled Equipment for RH Humidifier and Dehumidifier or Fans
Power Supply 15 VDC 400 mA Auxiliary Power Supply 120 V – 60 Hz – 15 A (iGS-25 power box) Output Maximum Current 120 V, 15 A, 2 HP AC Adapter Power Supply 2V DC center positive 800 mA min Splash Proof Membrane Front panel Operating Conditions 0 to 60 °C, 0 to 95 % non-condensing RH Warranty 3 Years
- Tech Specs
Brand Intelligent Growing Systems SKU NBIGS110 Weight (lb.) 4.3 Lead Time Due to social distancing requirements, this product ships in 3-4 weeks Length (in.) 9.7 Width (in.) 7.4 Height (in.) 6.1 Warranty 3 Year UPC 666420105833 Shipping Restrictions AK, HI Prop 65 No Controller Functions Temperature Control, Humidity Control, Temp & Humidity Monitors Remote Sensor Yes Number of Zones Single Zone Humidity Setting Range 0-100% Temp Setting Range - 4 F to 122 F Has Photocell Yes Display Readout Type LCD Display Amps 15 Amps Voltage 120 Volts Frequency 60 Hz UL Listed No