- Home /
- Grow Lights /
- MH & HPS Grow Lights /
- Eye Hortilux SE 600 Watt Grow Light System
Eye Hortilux Product Documents
Eye Hortilux SE 600 Watt Grow Light System Spec Sheet
Eye Hortilux SE 600 Watt Grow Light System Installation Instructions
SE 600 Grow Light System from Eye Hortilux
The SE 600 Grow Light System is designed to maximize the performance of 600 Watt Eye Hortilux grow lamps. This system focuses 20% more of the light to the target area than our nearest competitor to enhance the performance of the lamp and maximize plant quality and yield. The SE 600 reflector was designed around 600 Watt lamps to create a consistent and uniform distribution of light.
Designed Specifically for 600 Watt Lamps
Eye Hortilux doesn't waste space
Reflector design can dramatically impact the amount of light reaching your plants. Most grow fixtures are sized for 1000 watt lamps leading to an inefficient focus of light. The SE 600 Grow Light System utilizes a reflector design sized specifically for 600 Watt grow lamps. This compact reflector design optimizes performance focusing more light on the plant canopy with superior uniform light distribution.
Eye Hortilux
Competitor
Easy Reflector Replacement
The EYE HORTILUX SE 600 Grow Light System includes a reflector that is easy to replace. After several grow cycles, system reflectors get dirty and sometimes scratched from cleaning. Having a reflector replacement schedule helps maintain consistent plant quality and high yields. Replacing a reflector in the SE 600 does not require purchasing an entirely new system.
Remote Ballast Capability
Growers concerned about extra heat can remove the SE 600 ballast from the fixture and operate it from a remote location. The ballast can then be run up to 15 feet away from the lamp.
Optimal Setup Recommendation*
| Coverage Area | 4 ft. x 4 ft. |
| Height Above Canopy | 3 ft. |
| Distanace Between fixtures** | 4 ft. |
*Optimal setup and performance measurements based on SE 600 fixture with HORTILUX 600W Ceramic HPS lamp. Actual performance may vary.
**The distance between fixtures should be measured from the center of the lamp.
System Specs
- Wattage: 600 Watts
- Input Voltage 120/240 Volt
- Amperage: 5.5A @ 120V, 2.63A @ 240V
- Socket Type: Mogul E39
- Light Uniformity – max/min: 2.9/1
- Light Uniformity – avg/min: 2.0/1
- Weight: 17 lbs.
- PPFD Average (400-700nm): 185 μmol/sec/m2
- Warranty: 3-Year Limited
- Certifications: UL Listed
Ballast Specs
- Circuit Type: High Frequency Sine Wave
- Lamp Types: Metal Halide & High Pressure Sodium
- Voltage: 120V, 240V
- Current: 5.5A, 2.66A
- Power Factor: > 0.95
- Mounting Position: Universal
- Operating Temperature: -5 to +40°C
- Maximum Case Temperature: 75°C
- Maximum Operating Distance: 15 ft (4.6 m)
- Dimming: NA
- Our Company
- Popular Searches
- Customer Service
- Commercial Pricing
- Shipping Policy
- Returns & Replacements
- Manufacturer Warranty
- Payment Methods
- My Account
- Recieve push notifications
- 312 Otterson Dr STE D
Chico, CA 95928 - Phone: 888-815-9763
- Fax: 888-582-0009
- Send Us a Message
-
Payments accepted:
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.