Core 2.0 1000 Watt Dimmable Enclosed Double Ended Grow Light, 277-400 Volt is no longer available

• Microprocessor Control
• LED Status Indicator
• Open Circuit Protection
• Short Circuit Protection
• Overtemperature Protection
• End-of-Lamp-Life Sensor
• Over/Undervoltage Protection
• Patented Ignition Control
• Auto-Restrike Protection
• Internal EMI Suppression
• Wieland RST 2013F B2 ZR2 SW
• Truss mount hangers included
• Compatible with 1000W DE HPS and DE MH lamps

Applications:

• Indoor
• Propagation
• Research
• Supplemental

Crops:

• Vegetables
• Herbs
• Annuals
• Medical

Open Reflector (C2NO & C2DO)

Specifically designed for multi-light array applications. The wide spread provides excellent uniformity. The open design effectively dissipates heat while maintaining ideal lamp operational temperature which maximizes lamp output and lifetime.

Autopilot PX2

The Autopilot PX2 Advanced Lighting Controller provides precision photoperiod control of up to 512 fixtures in two independently controlled zones, all from one centralized location. Designed to work with any controllable Phantom or Core HID fixtures, as well as PHOTOBIO LED fixtures, the PX2 can control 512 digital HID fixtures (256 per zone), or 100 analog LED fixtures (50 per zone). The PX2 offers the flexibility to operate both zones analog or digital, or one zone analog and the other digital.

Autopilot Analog to Digital Conversion Module

The Autopilot signal conversion module is ideal for facilities utilizing commercial environmental controllers to control lighting. The module converts analog 0-10V and 0-11.5V signals into digital RS-485 signals. It features two analog inputs and four digital outputs, divided into two zones. Each zone controls 256 fixtures, for a total of 512 fixtures per module. The included white data link cables are shielded against electromagnetic interference, with IP65 connectors that protect against dust and liquid.

• Lamp Power: 1000 Watts
• Main Voltage: 277V–400V
• Operating Voltage Range: 249–440V
• Max Input Power: 1082W
• Output Power Settings: 1000 Watts
• Power Factor: > 0.97
• Frequency: 50/60Hz
• Igniter Voltage: 3–5 kV
• THD: < 10%
• CF: < 1.6%

Application Notes

Only use open-rated Metal Halide lamps. For use with a generator, line conditioning equipment to control input voltage must be used in order to avoid damage to ballasts. Contact us for more information. Each ballast MUST be wired to the main’s neutral line back to the circuit. DO NOT “daisy-chain” a neutral line with any other ballast.