The reflector is designed to have ALL of the available light fall onto a 4' x 4' grid at a 24" install height over the canopy top. There is no stray light falling up to 5' to each side of the tray as would be the case with the commercial DE fixture. The DEFNC 4×4 comes with a NCCS compatible, 120/240V fan style DE high frequency ballast.
We at Nanolux have found an unfortunate growing number of cases of misuse of commercial DE fixtures in smaller non-commercial horticultural operations. Consumers have to realize that one of the largest features of commercial open DE fixtures is their wide and large light footprint allowing for "Commercial Overlap". The light spread on a commercial DE fixture is well over 10' wide in a typical installation height. This is not practical if you are growing over a 4’ x4’ tray. The Nanolux DEFNC 4×4 fixture is designed to produce vertical light penetration over a 4’ x 4’ tray. The reflector is designed to have ALL of the available light fall onto a 4’ x 4’ grid at a 24” install height over the canopy top. There is no stray light falling beyond each side of the tray, as would be the case with our commercial DE fixture. With the higher concentration of light falling onto the 4x4 grid, many growers report having to dim the fixture—doing so also helps reduce power consumption.
This is the reason that we DO NOT offer our commercial DE fixtures in 120V presentations. If you are using 120V, you are most likely using a limited number of fixtures (<10) which is generally NOT considered a commercial installation and does not require the application of the commercial overlap or its light interlacing effect.
NanoLux NCCS APP Data Transfer Unit
The Nanolux cloud control system was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive software.
At the heart of the NCCS is a software program which allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the Data Transfer Unit (DTU). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating with individual RTU (remote terminal unit) USB devices.
The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future.
|Lead Time||This product ships in 2-3 Business Days|
|Lighting Type||HPS/MH - Double Ended|
|Coverage Area||Veg: 5' x 5'; Flower: 4' x 4'|
|Exact Watts||1000 Watts|
|Bulb Type||Double Ended High Pressure Sodium|
|Ballast Type||Digital Ballast|
|Est. Electricity Cost /mo||$43.20|
|Power Cord(s) Included||240 Volt|
|Grow Light Certifications||ETL Listed|
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.