The Autopilot Greenhouse Master Controller (GMC) is designed to precisely control temperature, humidity, and CO2 in the growing area.
The GMC's enclosure features four separate power outlets used to connect external devices such as fans, CO2 injectors, air conditioners and dehumidifiers. Each external device easily connects to the unit creating a simple and user friendly platform.
The GMC's fan-powered remote combination probe features a highly accurate dual beam CO2 sensor. The remote sensor can be placed up to 15 feet from the controller and has been designed to resist EMI / EFI from electronic ballasts.
Each unit has been pre-programmed with factory recommended settings for quick plug and play operation. Autopilot controllers offer grow room guidance.
Note: This controller has a 14.5A maximum load. For higher amperage units, such as A/C units, it is recommended to use a power expander.
Autopilot Greenhouse Master Controller Questions & Answers
How do I change the photocell sensitivity on my Autopilot Greenhouse Master Controller?
Adjust by pressing and holding the Down arrow alone for 3 seconds. The display should read PHoTo _ _ 9 which is the most sensitive setting, then it can be raised or lowered using the up and down buttons. Then press Enter to accept the change.
A must have Review by Happy
(Posted on August 2, 2016)
A must have in the grow room. Review by Terry
(Posted on November 28, 2015)