Gavita Pro 1000 Watt E-Series Slim Line DE Grow Light with HR96 Reflector, 208-240 Volt is no longer available

Residential fixtures

Gavitas residential voltage fixtures offer flexible installation (120-240V). Choose an e-series control interface, a manual switch — or both

Professional Fixtures

Designed especially for grow rooms, our professional fixtures suit flexible and fixed installations. They are compact and come with a Repeater Bus interface (no manual control). For 208V three-phase or 240V.

Industrial Fixtures

Perfect for the rigors of industrial environments, these fixtures feature a Repeater Bus control interface (no manual control) or fixed output. For 277-347V three-phase.

208/240 Volt Slim Line

*The 208/240 Volt Fixture is the Gavita Pro E-Series Slim Line . Only 9.7 inches high makes the ‘Slim Line’ the shortest 240V Gavita fixture ever. The Gavita Slim Line series is part of the 'professional' line of fixtures. Designed especially for grow rooms, our professional fixtures suit flexible and fixed installations. They are compact and come with a Repeater Bus interface (no manual control). For 208V three-phase or 240V. The reduced height make this the fixture of choice for low rooms.

277/347 Volt

If you equip a larger operation, working on the North American 3 phase systems, you now have the choice of remotely controlling your lights with our Gavita Master controllers. We designed new, multi-voltage electronics to either work with the US 480V or the Canadian 600V WYE 3 phase installations, enabling much lower installation costs, more efficient electricity use and ease of installation. Running on a higher voltage (277V or 347V phase-neutral) these fixtures use less power and are more compact than traditional consumer 120-240V fixtures.

The compact complete fixture contains a lamp, HR96 reflector and horticultual quality ballast in one comprehensive package. The higher output and added efficiency of the industry standard HR96 reflector make this the workhorse of the family.

The reflector is replaceable (Gavita recommends to do this every 1-2 years) and there is a choice of replacement reflectors

The HR96 DE Reflector for overlapping configurations, assuring optimal uniformity and penetration. This is the industry standard reflector delivered with the fixture.
The HR96 reflector is made of a very high grade Miro aluminum with 95% efficiency, which provides optimal reflectance of light to your crop. The shape of this reflector may look as a deep reflector, but it actually gives you a medium wide beam angle of about 135 degrees. Reflector dimensions: 20.1" (length) x 9.6" (width) x 7.6" (height)

The W 150 DE Reflector for wide configurations, where uniformity and lower light levels are required in large rooms. 150 degrees beam angle, for double ended lamps.
This reflector is for Gavita Pro line and Hortistar and is easy to install. Designed for uniformity. Made from MIRO® aluminum. Reflector dimensions: 11.8" (length) x 10" (width) x 4" (height)

The M 110 DE SR Reflector for applications in single rows and small rooms, where a single reflector needs to create uniformity and high light levels. 110 degrees beam angle, for double ended lamps.
The medium spread of this reflector with 110° beam angle is great for tents and small rooms. This is Gavita's most suitable reflector for single light set ups. The 110° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Reflector dimensions: 10.7" (length) x 9.5" (width) x 4.5" (height)

The spread of the Pro 1000 equipped with the HR96 DE reflector is about 4x6 ft. (110x180 cm) at 3.5 ft. distance in overlapping plans, providing light levels of up to 1000 µmol/s/m2 per second per meter squared.

The fixtures light source is a Gavita Pro Plus 1000 Watt double ended HPS lamp, generating 2100 µmol/s of light. With a light maintenance of over 96% per 5,000 hours you only need to replace it once a year.

Note: Miniumum recommended hanging distance is 1 meter

Slim Line

When lighting plants, the distance to crop a crucial factor. The right distance gives you the desired light levels and optimal uniformity. In rooms with a low ceiling or retrofits every inch matters. By optimizing the fixture for professional grows, we were able to create a ballast measuring only 9.7 inches high without compromising quality or cooling efficacy.

Repeater Bus configuration

Gavita developed the Repeater Bus interface for fixed installations in professional environments. The Gavita difference is the double-port connector on the ballast. The active interface repeats the input signal to the output. This setup lets you directly daisy chain 100 fixtures per string and five strings per controller port to connect a maximum of 500 fixtures per controller port.

Replaceable reflector

Our bracket is designed to be able to change you reflector quickly. Miro aluminum can not easily be cleaned, and when you clean it, it will never be as good as a new reflector. We recommend to change reflectors every year in a “dirty” environment (dust, foggers, sprays) or every two years in a clean environment.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

Soft start

Unlike magnetic ballasts our electronic ballasts never use more power than their specified power during the start-up sequence. Lamps reach their full power much quicker than with a magnetic ballast.

No in-rush current

The e-series fixtures are constantly connected to your mains supply, just like a television that is on stand-by. Because of that it never creates a high inrush power when switching on. You can fire-up all your lamps safely.

Double ended lamp

Our Double ended HPS lamps are the most efficient HPS lamps available. Double ended lamps have the advantage that they are always in the focal point of the reflector, there is no frame wire in the lamp which results in less light interception, and the lamp is very small in diameter which prevents reflected light to be intercepted by the lamp in the reflector.

High frequency electronic ballast

There is no such thing as a universal ballast. You will get the optimal output when you match a lamp and ballast which are designed for each other. Our ballasts are designed to power our horticultural double ended lamps at exactly the right high frequency and power for optimal and stable output, and a long light maintenance. Our ballasts are only suitable for high frequency HPS lamps as specified in the product manual.

These Gavita fixtures are designed for external control and the new Gavita Pro line e-series are improved models and are suitable for central control with the Gavita Master lighting controller.

Now you can have complete lighting control at your fingertips.

• Gavita Master Controller EL1 - Gen 2
• Gavita Master Controller EL2 - Gen 2
• Gavita Master Controller EL1F - Gen 2
• Gavita ECM1 External Contractor Module

Find all the Gavita Controller parts you need here
Gavita Master Controllers & Accessories