DIG White Polyethylene Distribution Tubing

DIG’s premium grade White Linear Low-Density Polyethylene Distribution Tubing has improved flexibility, durability, and UV resistance. Used for greenhouse, landscape, and agriculture the white distribution tubing offers superior environmental stress cracking resistance for long-term use. The white distribution tubing is offered in 1/8” and 1/4” diameters and in various lengths.

Features & Applications

• Supports multi-outlet emitter placement flexibility, and can be used with point source drip emitters, micro sprayers, or micro-sprinklers.
• Used for commercial and agriculture applications, including greenhouses and nurseries.
• Designed for all low-volume irrigation applications, indoor and outdoor.
• Performs well in both cold and warm climates.
• Manufactured from the highest quality linear low-density polyethylene resins.
• Excellent ultra-violet (UV) protection, environmental stress cracking resistance, and burst strength.
• White 1/8” and 1/4” in coil lengths of 100’, 500’, and 1000’ or precuts.
• The white-colored distribution tubing is opaque in nature, preventing algae growth.
• The white-colored distribution tubing endures heat better than black or other colors, keeping the water temperature cooler.
• The ¼” white-colored distribution tubing is available with pre-punched holes at various spacings.
• Able to withstand heat and most chemicals used in agriculture.
• Produced under the highest quality control standards for the highest quality coils.
• Made in USA.
• Five years limited warranty.

Specifications

• Operating pressure: up to 70 PSI (4.8 bar)
• Coil sizes: 100’, and 1000’ (30 m and 300 m)
• Precut sizes in 2’, 3’ and 4’ lengths (60, 90, and 120 cm)
• Recommended operating pressure: 15 to 35 PSI (1 to 2.4 bar)
• Dimensions: 1/8”: .125 ID X .187 OD (3 x 4.7 mm)
• Dimensions: 1/4”: .170 ID X .250 OD (4.3 x 6.3 mm)
• Color: solid white
• UV: 2%
• Material: linear low-density polyethylene-based resins
• Warranty period: 5 years