DIG 1/2 Inch Sprinkler Riser to Drip Conversion Tee Kit, 0.700 Inch OD - Pack of 10

The 1/2″ FNPT X .700″ OD Sprinkler Riser to Drip Conversion Kit, model SRC-25-700, is used to convert a 1/2” sprinkler riser into a low-flow drip irrigation zone. The SRC-25-700 includes a 1/2″ conversion adapter, a 25-PSI preset pressure regulator, and a .700″ OD swivel tee to start a drip irrigation system for landscape plantings or lawn replacement from any 1/2” sprinkler riser. Constructed of molded ultraviolet-resistant, high-impact plastic, the kit allows a 1/2” sprinkler riser to serve as the point of connection from the 1/2” riser to 1/2” dripline or drip tubing. The 25-PSI pressure regulator reduces the outgoing pressure, providing protection to the zone.

Features

• Converts a 1/2” male pipe thread riser to a two-way .700″ OD compression connection
• Allows the start of a drip irrigation zone from any sprinkler riser
• Reduces incoming water pressure to the ideal working pressure for a drip system
• Simple and easy solution for starting a drip irrigation system
• Provides flexibility in converting a 1/2” riser into a drip irrigation zone in a few steps
• Secure and easy installation of drip line or drip tubing without glue or clamps
• The tee’s black insert fits all drip line or polyethylene drip tubing with .670″ OD, .700″ OD and .704″ OD
• High-strength plastic construction with UV protection for durability and long life

Specifications

• Kit Includes: 1 1/2” adapter, 1, 25-PSI (1.7 BAR) pressure regulator, 1 swivel tee with a 60-mesh screen, .700" OD
• Maximum operating pressure: up to 100 PSI (7 BAR)
• Flow rate: up to 5 GPM (19 L/H)
• Outlet preset pressure: 25 PSI (1.7 BAR)
• Inlet: 1/2" FNPT
• Outlet .700" OD compression tee fits drip line & poly tubing with .690" OD, .700" OD and .704" OD
• Screen: 60 mesh
• Temperature range: up to 130°F
• UPC code: 840620100298
• Materials: high impact plastic with UV protection