Netafim Button Dripper

Netafim Button Drippers

On line non-pressure-compensated dripper for applications such as greenhouses, nurseries, garden pots

Why Button & Pot dripper?

• TurboNet™- Labyrinth ensures wide water passages, large deep and wide cross-section that improves clogging resistance.
• Flexible location- Dripper can be positioned exactly where required. The number of drippers can be increased to increase the water quantities applied aimed at meeting the tree’s growth rate requirements. Allows the installation of “spider assembly”, splitting the drip supply to a number of drip outlets.

Specifications

• Working pressure up to 2.0 bar.
• Recommended filtration: 130 micron / 120 mesh. Filtration method selected based on the kind and concentration of dirt particles contained in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone shall be installed before the main filter. Where sand/silt/clay solids exceed 100 ppm, pretreatment shall be applied following Netafim expert instructions.
• TurboNet™ labyrinth with large water passage.
• Insertable into thick wall blank PE pipes(0.90, 1.00, 1.20 mm).
• Injected dripper, very low CV.
• The Pot model to be threaded into a 3 x 5 mm micro-tube.