- Home /
- Grow Lights /
- LED Grow Lights /
- 300 Watt LED Grow Lights /
- Fluence SPYDR 2x LED Grow Light
- Coverage Area
Varies By Configuration - Exact Watts
Varies By Configuration - LED Light Spectrum
Full Spectrum - Total PPF Output
Varies By Configuration - PAR Efficiency
Varies By Configuration - Dimmable:
with Optional Controller - Voltage
120-277 Volts - Power Cord(s) Included
Choose Power Cord/Plug Type - Est. Electricity Cost /mo
Varies By Configuration - Warranty
5 Year
Light Up Your Business To New Heights
Flexible | Scalable | Uniform
SPYDR 2x is an early-development stage top-lighting solution for commercial horticulture cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO2 supplementation at ambient conditions around 400 ppm. SPYDR 2x is comparable to the previous generation’s SPYDRx and delivers an average of 550 µmol/m2/s of highly-uniform light over a 4’x4’ area at only 6”–12″ above canopy.
Whether growing flower, food, or ornamental plants, the Fluence SPYDR Series was designed for single or multi-tier growers who want to optimize their grow space for the maximum crop yield while producing the highest quality crops.
Note: Power Supply mounting bracket and dimming cable are included.
Note: Warranty for power cord is 90 DAYS
Features & Benefits of the Fluence SPYDR 2x
SPYDR 2 series is ideal for high PPFD cultivation with single or multi-tier racking – from veg to bloom. The series has an average PPFD up to 1,060 µmol/m2/s over a 4’x4’ (122×122 cm) canopy.
With 3 sizes (47", 40", and 33") and with 10+ rack mounting options, the SPYDR Series can illuminate all types of vertical racks and grow tables with precise and uniform light on the plant canopy. The two PPF output levels and built-in dimmability enable the exact and dynamic PPFD control over each of the plant growing stages. The SPYDR Series is the indoor lighting solution for all growers looking for an edge in efficiency, quantity, and quality.
- Precise and uniform lights for indoor racks
- Detachable Power Supply
- Push-lock Connectors
- Easy Moutning Options
Detachable Power Supply
The SPYDR 2 Series features a detachable Power Supply that can be mounted remotely on the side of a rack or on an adjacent wall to remove heat from your grow space. With the power supply remote mounted, the remaining SPYDR 2 fixture is only 1.3” (33 mm) thin (4.6” (117 mm) with power supply attached).
Push-lock Connectors
For quick and easy installation, all SPYDR 2 Series fixtures and associated cables have been updated with Push-Lock connectors. Power and dimming cables now snap together with a light push while still retaining their IP66 wet-location rating.
Easy Mounting Options
With the ability to maximize use of your growing space, SPYDR 2 has various hardware options for easy mounting to all types of racks and tables with no drilling or other modifications to the rack system. Recommended mounting height of 6”–12″ (152 x 305 mm) above plant canopy.
Passive Thermal Management
Patent-pending thermal management is the result of our dedication to deliver the most energy-efficient lighting systems for real-world applications. Every Fluence system is passively cooled
No fans. No noise. No maintenance.
Energy Efficient
Our focus is, and always has been, to design high-performance energy-efficient solutions for real-world applications. Fluence has designed a unique thermal management system capable of dissipating more heat than previous generation products.
The SPYDR Series comes in 2 other models
If you want the SPYDR Series but require more power, Fluence also has the SPYDR 2i & 2p
The SPYDR 2i is a high-performance, full-cycle top-lighting solution for commercial horticulture cultivation, with the power to scale from vegetative growth to higher light intensities in bloom. It was designed for commercial growers to push the envelope with high-PPFD cultivation practices along with sophisticated CO2 supplementation.
SPYDR 2p is a full-cycle top-lighting solution for commercial cultivation. For optimal results, we recommend SPYDR 2p deployed in environments with CO2 supplementation between 800-1400 ppm in the reproductive growth stage due to high PPFD levels
Advanced Indoor Spectra
PhysioSpec Indoor
To create the most advanced spectrum for complete physiological plant growth, we had to challenge every assumption. Not only did this make the spectra better, it made it beautiful. Previously, 660nm (red) and 450nm (blue) were the most efficient LED packages and coincided with peak Chl A and Chl B absorption areas. This led to a negligence of key photoreceptors and pigments outside this range.
PhysioSpec Indoor is a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.
Choose from several different mounting options to hang your fixture
- Short "V" Mounting Brackets
- Long "V" Mounting Brackets
- Solid Decking Moutning Brackets
- Lance Hangers
- Adjustable Hanging Kit
Provides a 4-point mounting solution that's ideal for water-fall decking on top of 2"-3.5" support beams (rolling racks & some pallet racks)
Provides a 4-point mounting solution that's ideal for water-fall decking on top of 4"-5" support beams (pallet racks)
Provides a 4-point mounting solution that's ideal for levels of solid decking in rolling tables. Requires two front-to-back bars per fixture
Provides a 2-point hanging solution, but the customer must supply their own chain or cable. PSE must also be centered on the fixture or it will be off-balance
Provides a 2-point hanging solution with 5' of braided stainless steel wires & carabines. PSE must also be centered on the fixture or it will be off-balance.
Specifications for the SPYDR 2x
Fixture Size | Photon Flux (μmol/s) | Efficacy (μmol/J) | AC Power @ 277 V (W) |
---|---|---|---|
47" | 860 | 2.51 | 342 |
40" | 852 | 2.49 | 342 |
33" | 705 | 2.40 | 294 |
Input Voltage | 120-277V AC, 50/60 Hz |
---|---|
Mounting Height | 6" - 12" (15.2cm) Above Canopy |
Thermal Management | Passive |
Max. Ambient Temperature | 95°F / 35°C |
Dimming | 10V-Source |
Lifetime | L70: > 150,000 hrs |
---|---|
Power Factor | > 90% |
Certifications | UL 8800, UL 1598 Wet Location, DLC |
Warranty | 5 Year Warranty |
Power Cord Length | 6 or 15 Feet |
Features
Brand | Fluence |
---|---|
SKU | FLU-SPYDR-2X |
Weight (lb.) | 25 |
Prop 65 | No |
Length (in.) | 47" |
Width (in.) | 42.8" |
Height (in.) | 1.26" |
Warranty | 5 Year |
Lead Time | This product ships in 2-3 weeks |
Hazerdous Material | No |
Lighting Type | LED |
LED Light Spectrum | Full Spectrum |
LED Fixture Type | Multi-Bar |
LED Features | Dimmable *with Controller |
Est. Electricity Cost /mo | Varies By Configuration |
Exact Watts | Varies By Configuration |
Suggested Hanging Height | 6" - 12" From Canopy |
PAR Efficiency | Varies By Configuration |
Total PPF Output | Varies By Configuration |
Voltage | 120-277 Volts |
Amps | Varies By Configuration |
Frequency | 50/60 Hz |
Power Cord(s) Included | Choose Power Cord/Plug Type |
Power Cord Length | 6 or 15 Feet |
Coverage Area | Varies By Configuration |
Grow Light Certifications | IP66 Rated, DLC Listed, UL Listed |
ETL Listed | No |
UL Listed | Yes |
Be the first to review this product