Our revolutionary hydrogen peroxide-based cleaner provides performance unmatched by any other peroxide based cleaners. It aggressively removes stains from mold and mildew on porous, semi-porous, and non-porous materials. Created using innovative chemistry and a unique manufacturing process, its proprietary formulation releases the product’s maximum oxidation potential. This allows for a lower concentration product that is not DOT regulated.
Utilizing a proprietary combination of cutting-edge surfactants and advanced hydrogen peroxide, Fiberlock’s Advanced Peroxide Cleaner produces results that, up until this point, have not been attainable in a contractor friendly formula. When applied, Advanced Peroxide Cleaner penetrates deep into the substrate. The hydrogen peroxide reacts instantly with stains through an oxidation process that produces a high foaming action that helps lifts dirt and inanimate organic particulate to the surface. The oxidation process continues for some time after application and results in the brightening of the substrate within 24 hours.
When addressing mold and water damage, you need to make sure you get lasting results. That’s why pros in the remediation business adhere to industry best practices which include a three step process: Clean. Kill. Coat. Fiberlock provides the most complete, most effective products to ensure that mold and water damage issues are remediated and that your investment, health, and safety are protected.
Fiberlock's IAQ Advanced Peroxide Cleaner is step one in Fiberlock's "Clean. Kill. Coat." process. Check out Part two, "Shockwave" here! For Part three, you can use either Aftershock , found here , or IAQ 6000 GEN3 found here!
Always test textiles and fabrics for color stability in an inconspicuous area prior to use. Advanced Peroxide Cleaner can be applied with a trigger or pump sprayer, airless spray or mop/brush. When applying, saturate the affected material with enough product to remain wet for at least 10 minutes.
Special Note: Only add Advanced Peroxide Cleaner to application equipment that is clean and free of dirt and debris. Additionally, never return unused material to the original container that the Advanced Peroxide Cleaner came from. Instead, dispose of it properly according to all federal, state and local regulations.
500 ft2 per gallon on porous surfaces and up to 1200 ft2 per gallon on non-porous surfaces. Note that coverage rates are approximate and depend on how heavily the Advanced Peroxide Cleaner is applied to the substrate.
Store securely closed and upright in original container. Vented cap can leak if container is placed on side. Do not store in direct sunlight as this will reduce the potency of the product. Avoid shipping or storing below freezing or above 100°F. If product freezes, thaw at room temperature and shake gently to remix components. Store in locked area inaccessible to children.
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.