Propagation systems for all growers
The EZ-CLONE Low Pro System is a true aeroponic system. Every aspect of our patented aeroponic cloning system has been carefully thought out and designed with the utmost passion, to produce the most effective and user-friendly cloning system ever seen. The delicate plant base is suspended in air and is gently misted with an oxygen-rich solution. Just set it up and let it run. EZ-CLONE Low Pros require little maintenance. Because the cuttings do not dry out, the EZ-CLONE system requires NO humidity dome. Not only does this allow the plants to breathe and transpire, but it also drastically reduces the risk of airborne fungi such as powdery mildew and it eliminates plant stress. Get rooted and get growing.TM
Whether they are novices starting out in plant cloning or experienced commercial cultivators, almost all will demand propagation solutions that are easy and high-yielding. The EZ-CLONE products are designed to scale and grow as the customers expand their propagating needs. In addition, our products will bring real results to your customers and they’ll keep returning to the retail establishment to replenish their supplies.
Get predictable, consistent results. All you need to provide is the mother plant. EZ‑CLONE Plant Cloning System comes in 16, 32, 64, and 128 sites (available slots for cloning at a single time), and is available in Black and White colors. Each system comes with the following:
*EZ-CLONE manifold for 16, 32, and 64 cloners uses the 64-site manifold. 128 cloner uses 128-site manifold
Designed for Ease and Highest Yield:
More Oxygen With Aeroponics
Yes, the EZ‑CLONE Plant Cloning Systems utilize water in the Reservoirs but the cutting (plant) is placed in our cloning collars and suspended in the air from the top of the Lid for maximum exposure and utilization of oxygen. It is critical in the delicate rooting process to expose the roots to oxygen versus leaving them in standing water. Standing water has a higher likelihood of introducing bacteria, disease, and dreaded fungus to your delicate cuttings.
Our EZ‑CLONE aeroponic Plant Cloning System mists the roots via the accompanying pump and manifold within the Reservoir to give your cuttings the required dosage of water. You can set it and forget. That’s how easy it is to clone the mother plant!
Reliable Rooting Success
How fast your clones bear the desired amount of roots is based on plant type and the strain- as well as the appropriate values of your pH, nutrient electrical conductivity (EC), water temperature, hormone concentration, lighting, growing environment, etc.
Garden plants like tomatoes or mint can start to show roots in as little as three days and be ready for transplant (or selling) within five to seven days when everything is in tune. For most garden plants and situations, expect to see a lot of roots in about two weeks when it comes to aeroponic cloner time.
Optional Add-On: EZ-CLONE Infinity Collar
The EZ-CLONE Infinity Collar is the world’s #1 reusable plant cloning collar that is the choice for Agricultural and University research labs. The EZ-CLONE Infinity Collar is made of silicone and is FDA food-grade compliant– which has the highest sterilization and reusability rating known in the market. This is an exceptional choice of cloning collar for those seeking top-grade sustainable solutions.
You can wash, machine-wash, boil, microwave, bleach, and even place it in your pressure cooker or oven to sterilize! The EZ-CLONE Infinity Collar comes in 16-Pack and 128-Pack options. Get rooted and get growing.
Optional Add-On: EZ‑CLONE Propagator Pro Cloning Collar
Introducing our newest pride and joy, the EZ‑CLONE Propagator Pro. This eco-friendly soilless cloning and rooting collar are made of our propriety method of blending a high-porosity mix of coco and peat. It is COMPOSTABLE and all-natural. The Propagator Pro™ is excellent for both plant cloning and seed sprouting!
You can essentially root your plant, set it in the soil, and let nature takes its course in breaking down the collar giving the plant essential compost nutrients, and allowing the material to compost in the soil as the plant grows, which significantly reduces plant stress when transplanting.
Optional Add-On: EZ‑CLONE Rooting Compound & Clear Rez
EZ‑CLONE Rooting Compound
With every system you order, a sample size of the EZ‑CLONE® Rooting Compound (in gel form) is included so you can witness the magic of rooting success. As growers ourselves, we have used all kinds of rooting hormones and we can testify our EZ‑CLONE Rooting Compound is the best there is in the market.
EZ‑CLONE Clear Rez
The EZ‑CLONE Clear Rez is formulated with the highest ingredients to give the right levels of pH to the water inside the reservoir. It is a noninvasive water treatment solution (in liquid form) to keep your roots clear, as well as keep your EZ‑CLONE Plant Propagation reservoirs clean.
Available in sizes for small to extra-large capacity EZ‑CLONE Cloning Systems.
The EZ-CLONE Low Pro Cloners Dimensions
How often do I need to clean my EZ-CLONE system? Thorough cleaning in between every cycle is strongly suggested. Please refer to these cleaning recommendations here.3.) How do I clean my EZ-CLONE system?
What temperature should my reservoir be? With the use of EZ-CLONE Clear Rez we recommend reservoir temperatures to maintain between 70-85 degrees.
What should the temperature be inside my grow room where the EZ-CLONE system is housed? We operate all of our testing units in a 75 degree grow room. We strongly recommend maintaining an ambient air temperature between 68 and 78 degrees.
How many gallons does it take to fill my system? 16 Unit 2.5 – 3 gallons
32 Unit 5 – 5.5 gallons
64 Unit 8 – 10 gallons
128 Unit 11 – 20 gallons
If the exact volume of water is not required for determining the proper ratio for additives, fill your system to the bottom of the manifold.
What kind of water should I use? Generally tap water is fine, however if you are in an area with poor quality tap water, RO water (reverse osmosis water) or bottled spring water is recommended. When using RO water due to the lack of particulate it can be difficult to stabilize pH. We recommend using a 75% RO water to 25% tap or bottled spring water ratio to add particulates back into the water which will help the pH stabilization. Generally distilled water is not recommended.
What additives do I use with my EZ-CLONE? EZ-CLONE Rooting Compound and Clear Rez.
What should the pH of my water be? Anywhere between 5.5 and 6.5 is acceptable though we recommend 6.0. Remember your initial pH is likely to rise during the first 24-48 hours. It is best practice to keep an eye on your pH at this time.
What kind of light works best with the EZ-CLONE Classic System? Simple T12 fluorescent 40 watt lights work great. A two foot dual bulb fixture works well over the 16 and 32 site systems while a four foot dual bulb fixture works well for the 64 and 128 site system.
How far should my light be from my cuttings? 18-24 inches is more than sufficient
What light schedule should my EZ-CLONE system be on? 18 – 24 hours a day. It’s usually the growers preference.
When should I expect roots? Rooting times vary greatly depending on environmental conditions, species and health of donor plant. Usually roots will begin to develop around 7-10 days for many herbaceous and softwood cuttings. Hardwood cuttings may take a little longer.
When are my cuttings ready to be transplanted? Depending on the medium your transplanting into, your cuttings are ready to be transplanted when roots are at least 2” long. Typically longer more developed roots have a higher success rate. Remember if roots get too long they can be trimmed with sterile scissors during transplanting.
Wheres the best place to put my EZ-CLONE system? Somewhere that is sturdy or stable enough to set the system fully filled. A sturdy table, the floor or heavy duty wire racks are all good options.
Can I reuse my Cloning Collars? Yes, if properly cleaned and sterilized between cycles. Though we strongly recommend using new ones each time for best results. Look at it as a 50 cent per cutting insurance policy to help eliminate the potential for bacterial infection. 50 cents is definitely not worth losing a plant. Cleaning Instructions here.
Can my EZ-CLONE system be used outdoors? No, the EZ-CLONE has been designed to be used in an indoor application.
Where’s my humidity dome? You didn’t get one cause you don’t need one. A humidity dome increases the potential for powder mildew, pest infestation, prevents the cuttings from transpiring naturally and can delay rooting times.
Does my pump need to run continuously 24 hours a day? Running your water pump continuously is recommended though cycling your water pump may produce longer roots quicker. A thirty minute on thirty minute off cycle has produced the longest roots the quickest.
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.