Dosatron Water Powered Doser - D25 Series - 11 GPM

Simplify your nutrients by directly installing Dosatron Doser into the water line

Installed on the water supply line, the Dosatron uses water pressure as the only power source. Thus activated, it takes up the required percentage dose of concentrate and then mixes it with the moving water. The solution produced is then propelled downstream. The dose of injected product is always proportional to the volume of water passing through the Dosatron, regardless of variations in flow or pressure in the water supply line

11 GPM is the max flow rate for the D25 series

Available options: (Seal & Dilution/Injection Range)

• D25RE2VFBPHY - Viton Seal - 1:500 to 1:50
• D25RE09VFBPHY - Viton Seal - 1:1000 to 1:112
• D25F1VFII - Viton Seal - 1:100
• D25F1VFBPII - Viton Seal - 1:100

Selecting your Dosatron Injector

Seal Options

• Viton Seals

  Generally used for products with neutral to acidic pH. Ex: fertilizers, pesticides, acids (pH correction), supplements, surfactants

• Aflas Seals

  Generally used for products with a higher than neutral to alkaline pH. Ex: pH up products, calcium hydroxide (liquid lime), calcium carbonate, potassium carbonate

• Kalrez Seals

  Used specifically for Peracetic acid (also known as peroxyacetic acid, or PAA) products. Ex: ZeroTol, SaniDate, etc.

Dosatron Model Name Definitions.

There are several Dosatron Dosers with similar models numbers that vary by only a 1 or 2 letters. BE SURE to make a selection based on your exact needs!

Units with HY in the name are specifically meant for the Dosatron NDS - Nutrient Delivery System. Units with "HY" in the model number include a SCH 80 Threaded Union to connect the injector to the other injectors/kits in-line.

Units with BY have a Bypasss option essentially taking the specific doser out of operation. Once the Bypass switch is flipped, the dosers stops the ram pump from pulling chemicals into the water line.

How the Water Powered Doser works

Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.

When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector.

On the upstroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe.

On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.

1. Water Flow
2. Water enters the Dosatron body
3. Concentrate is pulled up into the Dosatron
4. Concentrate mixes with the incoming water
5. Blended solution is discharged into the water line

*Doser in example may look different from your actually doser

Specifications for the D25 Series