DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for commercial, agriculture, and residential applications. DIG extrudes its polyethylene tubing at their Vista manufacturing facility, producing over 100 million feet each year. A minimum of 2% carbon black is added to ensure maximum UV protection.
The distribution tubing can be broken into 2 types; the 1/8 and 1/4 inch tubing and the 1/2, 3/4, and 1-inch tubing. The only differences in these is that the smaller sizes (1/8" & 1/4") use a slightly lower density polyethylene resin and the larger sizes (1/2", 3/4", & 1") can come in either black, brown, or tan color. The smaller sizes are all black.
DIG's polyethylene drip tubing is available in a wide range of sizes and coil lengths.
Available in 50', 100', 200', 250', 500', 1000' and 3000' coils (15 m, 30 m, 60 m, 75 m, 150 m, 300 m, 900 m)
Available Sizes (Inside & Outside Dimensions)
*The 1/4 Inch is on the Outside Dimensions. All other sizes are based on Inside Dimensions
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.