Solar Gaia is an organic-based formulation of Humic compounds, utilized to facilitate fertilizer uptake, especially lower levels of Nitrogen in organic fertilizers. Solar Gaia is intended for use throughout the vegetative stage, and early flowering stage of growth. Used in conjunction with Sonoma Gold Grow and Sonoma Gold Bloom, Solar Gaia insures that every bit of fertilizer is available for uptake by plants.
Solar Gaia takes its name from the Sun, “Solar,” and Earth, “Gaia.” Gaia was the believed to be the primordial Goddess of the Earth, creator and giver of birth to the Earth and all the Universe. The heavenly Gods, the Titans, and the Giants were born to her. The Gods reigning over their classical pantheon were born from her union with the sky, while the sea-Gods were born from her union with the sea.
As ancient as this story is, Solar Gaia™ contains the derivative of an ancient source “Leonardite”; this derivative is found in the form of Humic Acid. Humic Acid is an excellent soil conditioner; the presence of carboxylate and phenolate groups gives the humic acids the ability to form complexes with ions such as Mg2+, Ca2+, Fe2+ and Fe3+. The formation of (chelate) complexes is an important aspect of the biological role of humic acids in regulating bioavailability of metal ions.
|Measurements For Drain to Waste & Soil||Sonoma Gold||Sonoma Bloom||Solar Gaia|
|Clones & Seedlings (After Roots)||2.5 ml/gal||None||2.5 ml/gal|
|Vegetative Stages (1-2 Weeks)||25-50 ml/gal||None||2.5 ml/gal|
|Early Flowering - Transition Stage (1-2 Weeks)||25-50 ml/gal||5 ml/gal||2.5 ml/gal|
|Full Bloom - Fruting Stage (4-8 Weeks)||15 ml/gal||35 ml/gal||2.5 ml/gal|
|Full Bloom - Flush Stage (5-10 Days)||None||None||None|
Directions For Use:
Solar Gaia is designed for use in hydroponics, soilless, continuous feed systems, drain to waste, and soil applications.
For use during vegetative and early flowering stages.
Shake Well and Measure carefully using a millilitre measuring cup.
Do not store in direct sunlight
Do not freeze
Does your product work with all mediums?
Yes. Cutting Edge Solutions products have been developed wth a very broad range of variables, from water sources to varying types of medium and growing methods. Through our experience with these differences we have achieved a final formula that is effective when used across a wide spectrum of methods.
How long should I go between tank changes?
Tank change intervals depend on the size of your reservoir, and whether or not you are using a drain to waste or recirculating watering system. The average life span of a reservoir is about 5-7 days. When using drain to waste it is best to check your PPM/EC level as the nutrient solution is used to make sure that there is no spike in the PPM/EC, but usually the plants will use the fertilizer as they grow. It is more critical to check your nutrient solution while utilizing a recirculating system, as the runoff can drastically change the PPM/EC level of your nutrient solution. If your PPM/EC is raising in your re-circulating reservoir, you should top it off with plain water until your meter shows an acceptable level.
The size of a plant or the growth stage can determine the rate of water usage and nutrient uptake. Logically, the larger the plant gets, the more water and nutrient it will use. Some short-term crop plants (tomatoes, lettuce) go through an aggressive nutrient uptake around the 3-5 week period, so make sure to keep up on tank changes/monitoring during this critical time period.
Is a transition period necessary between the vegetative and bloom stage?
Depending on the type of plant you are growing, a transition mix may be beneficial. Some more hardy plants don’t need to gradually accept a new mix, while some more delicate plants appreciate more subtle changes in its' diet in order to reduce the risk of shock. Slower growing plant varieties may benefit from a transition period more than a faster growing variety as well. Some plants are naturally more efficient at taking up Iron and don’t require a transition stage.
What is the optimal Ph level for my nutrient solution?
The optimum Ph level for maximum nutrient availability is different for all elements, for instance Nitrogen has a different optimal Ph range than Phosphorus. The optimal Ph range can also vary due to medium and growing method variances, that is to say soil vs. rockwool or Aeroponics vs. Ebb and Flow. Therefore, we recommend a Ph range that is most inclusive, from 4.5 to 6.5. The Ph level we recommend for the most inclusive beneficial range is 6.
We do not recommend using Ph up at any time. If your water is acidic, i.e. RO water, adjust your water to Ph 7.0, then add nutrients. Utilizing this method, the elements are less likely to be locked out because of a severe Ph swing.
What PPM/EC is optimum for my nutrient solution?
PPM levels vary from situation to situation. Our recommended vegetative mixing rate can run as high as 2000 PPM, while a “flush” mixing rate is much lower. Please refer to the CES product mixing and reference chart for specific recommended PPM ranges for our products. Note: Our mixing chart is based on a 0 PPM water source, please test your water to establish your specific base range.
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.