Can Filters offers the complete package for your air ventilation needs with filters, fans, and accessories.
For times when you need as close to 100% uncontaminated air as possible, rely on Can Filters. With three decades of experience in revolutionary packed bed activated carbon filters, Can Filters is an easy choice.
This exhaust kit provides you with everything you need ventilation and odor control.
The Can-Fan High Output series are centrifugal fans utilizing our proven German design, Swiss components and precision manufacturing. The High Output Can-Fan uses a high-performance motor for use in more demanding applications. They have carried AMCA certified numbers longer than most other fans have been around and you can be sure you’re getting every CFM we claim to deliver. Can-Fan® can be easily installed in minutes using the included mounting bracket. They have a powder-coat finish and are 100% speed controllable. Rated for continuous operation, they utilize an extremely reliable external rotor motor and reverse curve blade.
Can-Filters uses the highest grade carbon carrying the highest CTC (First, why carbon filters? Activated carbon filters have been proven an effective tool for air filtration, removing a variety of VOCs (volatile organic compounds), odors, and other gaseous contaminants. They work by a process known as adsorption where VOCs, odors, and other gaseous contaminants adhere to the carbon’s surface. Can Fan also manufactures the LARGEST and smallest filter sizes allowing for the widest range of versatility in your system design right here in North America.
All complete odor control kits come with a variable fan speed controller and flexible air ducting. Variable fan speed controllers are a great addition to your exhaust set-up for their ability to reduce fan speed when you do not need as much air removed from your space or the ability to turn up to full speed to remove more hot stagnant air and odors. Lastly, Can Fan Kits come with a flange to easily attach your filter to your fan.
You will need to determine whether or not you are exhausting (going from a contaminated environment to a sterile environment in only a single pass through the filter) or recirculating, aka “scrubbing” (exhausting the system back into the contaminated space).
In an exhaust setting the air only passes through the filter one time so it is imperative that we remove as close to 100% of the contaminate as possible with that one chance. This requires that the contaminant have a certain time in contact with the carbon in order to be fully absorbed. Our filters are marked with both exhaust and recirculating ratings for just this reason. If you are using this system to exhaust, DO NOT exceed the exhaust rating for the filter, the more this rating is exceeded the less contaminant will be adsorbed because the two will not have enough contact time for adsorption to fully take place.
In a recirculating system, the contact time is not such a crucial number as we are taking contaminated air, filtering it, and releasing it back into what is typically and constantly decontaminated environment. It is for this reason that it is not necessary to remove 100% of the contaminant in a single pass. Instead, we double the exhaust rating which will reduce the contact time, the goal here is to still remove a large portion of the contaminant but to get raise the cycle rate of air through the filter above the rate of emission from the source. Now, instead of removing 99.9% of the contaminant in a single pass, we are getting closer to 60% but we are getting twice as many cycles through the filter in the same amount of time and over time, reducing the overall build-up of contaminant in the environment.
Sizing Your Space
Once you’ve determined the type of system you need, it’s time to size your space.
Typically for exhaust, we recommend a simple length x width x height /3 calculation. This will give you the amount of air (cubic feet per minute, CFM) that you will need to move to properly ventilate your space allowing for three-minute air exchange (all the air in the space is exchanged for fresh air every three minutes). This is the number you will match your filter to.
Room size: 10’x12’x8’ (960 cubic feet)
960 cubic feet / 3 minutes = 320CFM (Minimum recommended CFM to exchange the air every 3 minutes)
For recirculating systems, you can use the same length x width x height but divide by 1.5. This will give you a high cycle rate while still ensuring the removal of a majority of contaminants with each pass through the filter.
|4" Can Fan Ventilation and Odor Control Kit | 4 x 12||200 CFM||4' x 4' or smaller area|
|6" Can Fan Ventilation and Odor Control Kit | 6 x 20||412 CFM||5' x 9' or smaller area|
|8" Can Fan Ventilation and Odor Control Kit | 8 x 24||600 CFM||10' x 10' or smaller area|
|10" Can Fan Ventilation and Odor Control Kit | 8 x 39||840 CFM||10' x 10' or smaller area|
|12" Can Fan Ventilation and Odor Control Kit | 8 x 39||1020 CFM||8' x 16' or smaller area|
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.