The Trimpro Original Trimming Machine is one of the best wet trimmers on the market, helping you automate your harvest and achieve ultimate efficiency.
With the Trimpro Original, you can achieve quick, efficient harvests while producing top-shelf looking flower. This machine gently and quickly removes excess fan leaves, sugar leaves, and small branches from your plants. Here are some of the reasons we love this wet trimmer.
You can quickly trim up to 1/2 pound an hour with this stand-up, single-branch style machine. It should not be used for dry trimming , as it is optimized for wet flower. Using dry flower can damage the machine. If you need to trim dry, view our dry trimmers here .
The Trimpro Original is super easy to use. Just take a branch off your plant, and move it over the grate in a back and forth motion. Continue doing this while rotating the plant, trimming off excess leafy material from all angles, leaving you with a perfect trimmed branch.
This machine features a tempered steel blade, which makes a clean cut without degrading the potency or appearance of your buds. If you need a higher quality trim, you may consider the Trimpro Automatik series . This trimmer utilizes a fan and vacuum to gently pull sugar leaves from the bud, getting you a tighter, more aesthetically pleasing trim.
You can add on adjustable height leg extenstions , which give you more comfort and flexibility in how you trim. You can stand up or sit down throughout the day, saving your back, hips, and feet! You also have control over the blade, and since you manually move the flower over the trimming grate, you get even more control over the trimming process. Compared to hand trimming, using this machine is super easy and won't wear you out or give you hand cramps. All trimmings are collected for easy disposal or processing in a mesh bag.
The included leaf recovery system is easily disassembled for hassle-free transportation and disposal. You can then remove the blade assembly to sharpen, ensuring your trim comes out tight every time for the cleanest cut. You can easily clean the grate by spraying iso between uses, preventing gunking up and cross-contamination. Should anything ever go wrong, we have the replacement parts you need here at Hydrobuilder to keep your harvest running smoothly.
Trimpro Original Trimming Machine Specs
Trimpro offers a full line of trimming machines of various types and sizes:
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
How Do I clean My Trimpro Machine?
Use a plastic scraper to collect the pollen build-up. Do not use a metal scraper as it might scratch the coating on the grate and the blade. Use a cloth with rubbing alcohol to finish cleaning it.
How Do I Clean My Trimpro Bag?
Soak the bag in warm water, rub off the build up. You can also soak it in rubbing alcohol for a short amount of time, rub off the residue and simply pass it through some running water to finish cleaning it.
How Do I Adjust The Height Of My Trimpro Blade?
Blade height adjustment instructions can be found for each machine on their respective instruction sheet.
How Often Should I Sharpen My Trimpro Blade?
Trimpro blades are made of tempered steel which makes them very tough and gives them a great lifespan. It is important for the quality of your manicure to keep them sharp. It is manufacturer recommend to have them sharpened every 6 months to every year (highly depending on usage).
How Do I Sharpen My Trimpro Blade?
Sharpening the blade on Trimpro trimmers is a simple process. The most important part of the process is that you should not remove the blade from the hub to which it is attached! The tempered steel blades are balanced on the aluminum hub, allowing optimal operation of the trimmers. If the blade is separated from the hub there is no guaranty that the assembly will be balanced when you put it back into the machine. Sharpening instructions can be found for each machine on their respective instruction sheet.
How Do I Change The Amount Of Air Suction On My Trimpro Machine?
On every machine (except the Rotor) you can bend the flaps upwards to reduce their angle. This creates less air displacement, thus decreasing the amount of suction. You can bend the flaps downwards to increase their angle. This creates more air displacement thus increasing the amount of suction. *CAUTION: When bending the flaps downwards, make sure the flaps do not hit the metal wire brake line.
How Long Is The Warranty On My Trimpro Machine?
There is one year warranty for defective parts. If you are making a warranty claim, please have in hand the serial number engraved on the underside of the frame of the machine.
Be the first to review this product
Expert Advice Toll-Free
© 2011-2024 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.