- Trimmer Type
- Production Capability
- Feed Type
- Process Material (Wet or Dry)
*For Wet Trimming Only* - All Trimpro Trimmers are designed to be used with wet product only. If used with dry product damage may occur.
Designed to meet even the toughest most rigorous standards for sterilization and waste management, the new TRIMPRO ROTOR MED delivers the high-quality trimming and operational ease your business needs to maintain production at peak efficiency!
CSA Approved Trimming
TRIMPRO ROTOR MED is designed specifically to meet high regulatory demands, with its medical equipment component compliancy, easy and rapid disassembly and assembly, and unique waste management and control characteristics. Purpose-built to meet medical industry standards and CSA approved, the TRIMPRO ROTOR MED is designed and engineered to ensure operational ease and efficiency. Each unit is easy to disassemble for sterilization and is just as quickly reassembled, for minimized downtime. The flexible fingers are steam and alcohol resistant. The blade is made from tempered stainless steel and all connectors and attachments of stainless steel. White surfaces are finished with medical standard paint.
Easy to Use
The Plexiglas hood ensures debris-free operation. With no vacuum component, waste management and cleaning are greatly simplified, further assisted by standard weight, easily removed and sealed square trim-bags. Employing leather fingers to circulate your flowers over the non-stick grate, the leaves are trimmed by the razor sharp tempered steel blades. Built at an angle, emptying the Rotor is as simple as swinging the latch to open the door and your perfectly trimmed flowers gently exit the upper cylinder, all while the machine is still running so production is non-stop. As with all Trimpro machines, the blade height is adjustable to meet every preference.
Easy to Maintain
The Trimpro Rotor Med is equipped with a leaf recovery system and can be quickly disassembled for easy transportation. The blade assembly can be easily removed for sharpening to ensure you always get the cleanest cut. Cleaning the non-stick grate is a breeze. Just spray the grate and blade with isopropyl alcohal between uses to ensure a clean and sharp cut. The unit is easy to dissasemble and replacement parts are available here on hydrobuilder.com.
TRIMPRO MED SPECS
TOP MOTOR POWER: 0.3 A at 120 V 0.14 A at 240 V / 34.5 Watts BOTTOM MOTOR POWER: 1.9 A at 120 V 0.95 A at 240 V / 122 Watts MATERIAL: Frame: Aluminium / Blades: Tempered Steel GRATE: Non-Stick Coated Steel Standard: Slot size 1/4" ( 6 mm) NOISE LEVEL IN DECIBELS: Ear Level 77 dB
3.3 / 1M 69 dB
10 / 3M 65 dB
16 / 5M 64 dB
MACHINE WEIGHT: 30 Lbs. MACHINE DIMENSIONS: 17" (43.2 cm) diameter 21" (54 cm) tall PACKAGED SIZE & WEIGHT: 21" x 21" x 24" (54 x 54 x 61 cm) 42 lbs (19 kg)
- Trimpro offers a full line of trimming machines of various types and sizes:
- Manual Control Trimmers:
- Trimpro Trimbox
- Trimpro Original
- Trimpro Workstation
- Trimpro Trimbox with Workstation
- Robotic Touch Trimmers:
- Trimpro Unplugged
- Trimpro Rotor
- Trimpro Rotor XL
- Trimpro Rotor with Workstation
- Trimpro Rotor Med with Workstation
- Airflow Trimmers
- Trimpro Automatik
- Trimpro Automatik XL
- General Warnings:
- Never place your fingers, gloves or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives or any instrument above the grate.
- Safety glasses and gloves are required at all time.
The gloves have to be tight enough so they don't get inside the grate slots. A loose glove is dangerous. BE AWARE!
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
- Trimmer Type
- Tech Specs
Brand Trimpro SKU TPRTRMED-TPRTRMEDWS Weight (lb.) 30 Prop 65 No Height (in.) 24 Width (in.) 21 Length (in.) 21 Warranty Yes Lead Time Ships in 1-3 Days UPC 76625469126 UL Listed No Trimmer Type Bowl Operation Motorized Feed Type Batch Feed Process Material (Wet or Dry) Wet Production Capability 3-4 lbs/hr Voltage 120V/240V Amps 1.9A Max