Using the Hyperion platform and SunWave Technology, this product has the ability to control and monitor: temperature, humidity, CO2 and turn on and off four 1000w ballasts. The built in digital timing function of the Hyperion 2 activates and deactivates the ballast rated contactor according to pre-programmed lighting schedules or a user defined custom schedule. Utilizing our patent pending top off design has resulted in a product that is easy to install. The sensor features high quality temperature, humidity, light level and CO2 sensing components.
The Hyperion 2 features 4 – 240V AC outlets for a garden lighting systems as well as a complete wireless environmental controller. The Hyperion 2 Controller uses three modules: the remote sensor, master controller, and remote controller, to form a wireless control network (refer to Figure 1). The Hyperion 2 is equipped with transceivers that operate in the non-licensed 2.4 GHz frequency band and are FCC (USA), IC (Canada), and ETSI (Europe) compliant. The remote sensor and remote controller communicate wirelessly and allow remote monitoring and control of a room’s environment. All control parameters are changed over the wireless network via the user interface.
The Hyperion 2 remote sensor is equipped with CO2, relative humidity, temperature, and light sensors. The room’s environment is controlled by relay outputs located on the master controller. These outputs are used to control ventilation fans, a dehumidification unit, a CO2 generator or CO2 regulator & tank system, and a 240V AC four light system.
Separate Daytime and Nighttime control parameters are used to keep the room’s environment at optimum growing conditions throughout a 24-hour period.
Product Usage Diagram:
- Max Amp: 40 amps @ 240V AC/60Hz
- Max Lighting Amp: 20 amps (1000 watts per outlet)
- Temperature Setpoint Range: 45° F (7° C) to 85° F (29° C)
- Temperature Accuracy: ± 3° F (or 6° F centered)
- Humidity Setpoint Range: 20% to 90%
- Humidity Accuracy: ± 2% (or 4% centered)
- CO2 Setpoint Range: 500 ppm – 2500 ppm
- CO2 Accuracy: +/- 100 ppm
- Weight: 9.5 lbs
- Dimensions: 14” x 17” x 4”
- Tech Specs
Brand Titan Controls SKU HGC702880 Weight (lb.) 15.3 Lead Time Ships in 24-48 Hours Length (in.) 21.7 Width (in.) 16.2 Height (in.) 6 Warranty 3 Year UPC 849969019261 Prop 65 No Controller Functions Multi-Function Control, Temperature Control, Humidity Control, CO2 Control CO2 Sensor Type Remote CO2 Sensor CO2 Function Setpoint Range: 500 ppm – 2500 ppm Remote Sensor Yes Number of Zones Single Zone Humidity Setting Range Setpoint Range 20% to 90% Temp Setting Range Setpoint Range: 45° F (7° C) to 85° F (29° C) Has Photocell Yes Display Readout Type Digital Amps 40A Voltage 240V Frequency 60 Hz UL Listed No