- Rosin Press Type
- Plate Size
3" x 3"
- Max. Pressure
- Plate Material Type
- Heated Plates
- Needs Air Compressor
Rosin Industries Product Documents
The new Rosin Industries X5 Electric Heat Press eliminates the need for a pneumatic compressor. This plug and play, user-friendly heat press puts you in full control with its built in electronic pressure controller. The X5 Electric Heat Press gives off a sleek and clean design that is perfect for any work space.
- Manual and automatic plunger actions
- Integrated digital controller for time, temperature & cycle counts
- Automatic full press cycle function
- Manual incremental lowering & pre-heat function
- Emergency stop button
- Cast aluminum plunger cylinder for maximum durability
- Protective heat shroud
- Power 110VAC
- Temperature Range of 0-250°F
- Pressure Range of 0-2.4 Tons
- 3" x 3" Platen Size Warranty: 1 year Warranty on the housing and electronic components. 45 day Warranty on the heat plates
- Rosin Press Type
- Tech Specs
Brand Rosin Industries SKU RI-X5 Weight (lb.) 100 Prop 65 No Length (in.) 16 Width (in.) 12 Height (in.) 16 Warranty 1 Year (housing and electronic components) 45 Day (heat plates) UPC 694157858586 UL Listed No Rosin Press Type Electric Plate Size 3" x 3" Plate Material Type Aluminum Temperature Range 0-250 F Temperature Control Digital Temperature Accuracy 1 Max. Pressure 2 Tons Pressure Control Manual/Digital Adjustable Tilt Position No Needs Air Compressor Not Required Amps 6 Amps Voltage 110V Exact Watts 650W Power Cord(s) Included Yes
- Product Q&A
Rosin Industries X5 Electric 2.4 Ton Heat Press Questions & Answers
Which Material Should I Use?
Yields range significantly and depend largely on the quality of the materials used.
- Trim: 3% - 8%
- Shake: 8% - 15%
- Flower: 15% - 30%
- Dry Sift: 30% - 60%+
- Ice Water Extractions: 30% - 70%+
Note: Adequate application of pressure is important to achieve optimal yields and these figures are based on averages tests. Results may vary and depend heavily on your material as well as the operator.
Which Micron Bag To Use?
Depending on your material, the proper micron bags are suggested but results will always vary.
For dry sift and ice water extractions use a 36 micron or 72-micron bag. 72-micron rosin bags will offer higher yields compared to 36-micron rosin bags, but the 36-micron bags will provide the highest quality product.
For flower, trim, and shake, use a 115 micron or 90-micron bag. You will get the highest yield from a 115-micron rosin bag compared with a 90-micron rosin bag, but the 90-micron bags will give you more filtration and slightly higher quality product.
- 36 micron - Most filtration available, highest quality output rosin for use with small and finer material.
- 72 micron - High level of filtration, increased yields over 36 micron when pressing smaller and finer material.
- 90 micron - Higher level of filtration for use with flower, trim, and shake rosin pressing.
- 115 micron - Ideal level of filtration and high yielding for use with flower, trim, and shake rosin pressing.
What Temperature Is Ideal?
- Lower temperatures (200°F- 300°F) = more flavor/terpenes, less yield, end material is more stable (shatter-like consistency).
- Higher temperatures (300°F- 350°F) = less flavor/terpenes, more yield, end material is less stable (sap-like consistency).
How Much Pressure Should I Use?
There is no magic number for how much you need to press but most people use the formula of press pounds/plate surface area.
For example: A 10-ton press = 20,000 lbs. If you have a 3"x5" plate = 15 square inch. Hence, 20,000/15 = 1,333 PSI
Note: These numbers serve as a guide only. Results will always vary depending on temperature and material as well the press you choose. Refer to manufacturers recommendations for best results.
Rosin Industries X5 Electric 2.4 Ton Heat Press Reviews
- Its good
Go and get a bigger version of this machine. These are built in China. These guys bought this thing for 300 bucks, slapped their name on it and quadrupled the price!