NugSmasher DIY Rosin Press Plate Set with Automatic Heat Control

The do-it-yourself Rosin Press Extraction heated Plate Set is perfect for the extractor that has their own press and pressure figured out.

• Control box is made of solid steel
• Powder Coated finish
• Power circuit protected
• Digital heat control
• Industrial rubber feet
• 6' power cord
• 24" heat shielded plate power cords
• Reversible machined heater wire plate caps
• Made in the USA.

2.5" x 2.5" x 1"
These are the plates and heaters used on the NugSmasher MINI. Recommended press and ram pressure is 1 to 5 tons.

• 70 watt heaters in each plate
• 2.5"x 2.5" solid 6061 plates
• Thermocouple installed in the bottom plate and is interchangeable to top if desired
• Adapter plate with 1" diameter ram hole with 4x 1/4-20 ss set machine screws

4" x 4" x 1.2"
These are the plates and heaters used on the NugSmasher OG. Recommended press and ram pressure is 1 to 12 tons.

• 160 watt heaters in each plate
• 4"x 4" solid 6061 plates
• Thermocouple installed in the bottom plate and is interchangeable to top if desired
• Adapter plate with 2" diameter ram hole with 4x 1/4-20 ss set machine screws

4" x 6" x 1.25"
These are the plates and heaters used on the NugSmasher XP. Recommended press and ram pressure is 1 to 12 tons.

• 2 x 160 watt heaters in each plate 4 total
• 4"x 6" solid 6061 plates
• Thermocouple installed in both the bottom and top plate
• Adapter plate with 2" diameter ram hole with 4x 1/4-20 ss set machine screws

7" x 10" x 1.5"
These are the plates and heaters used on the NugSmasher PRO. Recommended press and ram pressure is 1 to 30 tons.

• 3 x 160 watt heaters in each plate 6 total for even heat distribution
• 7" x 10" x 1.5 solid 6061 USA Kaser Aluminum plates
• Thermocouple installed in both the bottom and top plate
• Adapter plate with 2" diameter ram hole with 4x 1/4-20 ss set machine screws