The D132 Series of fertilizer and chemical injectors is part of the Mega-Flo Series! These models have the water flow capacity of 132 gallons per minute.
The D132 models are the perfect solution to inject soluble fertilizer, while the low injection rate model (1:30,000) is for direct injection of water treatment chemicals.
D400 Series Injection Ratios
The D132 is great for:
Dilution / Injection Range
The Ratio Range for doser dilution is the range of rates that doser can be adjusted to for specific amount of chemical injection into the water supply. Most dosers can be adjusted within a range of dilution amounts and other dosers have fixed dilution amounts.
EX: Dilution range of 1:500 to 1:50 gives us a percentage of solution to water of 0.2% to 2%. This essentially tells us the percentage of chemical mixture dosed into the water supply.
The ratio and percentages are also commonly view in the following units.
|Dilution Range||1:1000 to 1:100|
|Injection Percents||0.1 to 1%|
|Water Flow Range||35.2 to 132 GPM|
|Operating Pressure Range||7 to 87 PSI|
|Connection Size||3" NPT|
|1:5000 to 1:500||1:30000 to 1:3000|
|0.02 to 0.2%||0.003 to 0.03%|
|35.2 to 132 GPM||35.2 to 132 GPM|
|7 to 87 PSI||7 to 87 PSI|
|33 lbs||33 lbs|
|3" NPT||3" NPT|
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.