- Home /
- Environment /
- Dehumidifiers /
- Portable Dehumidifiers /
- Anden 130 Pint Movable Grow-Optimized Dehumidifier with Wheels, 120 Volt
- Dehumidifier Type
Free Standing - Exact Moisture Removal Capacity (Pints/Day)
130 Pint - Amps
8.3 Amps - Warranty
5 Year
The Anden Model A130F Dehumidifier is the perfect solution for the precise management of humidity required in an indoor growing environment.
Grow environments require high-capacity, specially designed dehumidifiers to control humidity and protect crops. The Anden 130F delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop.
Anden A130F Advanced Features
- 130 Pints/day - Industrial-level humidity control
- 310 CFM @ 0.0” - Powerful circulation helps remove moisture from the air efficiently
- Energy Efficient - Removes up to 2.8 liters per kilowatt hour, helping keep your operation efficient
- No-Hassle Drainage - The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required
- Easy Filters - The self-sealing air filter protects the unit’s vital components, plus it’s easy to replace
- Flexible Installation - The pre-installed electrical plug is simple to remove for hard-wired applications. Plus, options for suspended, freestanding, or ducted installation
- Safety Checks - Terminals on the dehumidifier make it easy to install a float switch to protect against overflows
- 1-2-3 for VPD - The unit constantly monitors humidity and temperature, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth
- Built to Last - Designed and Manufactured in U.S.A. Dependability is at the heart of what we do. That’s why we offer a 5-year warranty on this product–so you can grow with confidence
Anden A130F Feature Specs
| Control | Built-in Digital Control with Display |
|---|---|
| Cabinet Insulation | 1/2" EPS |
| Air Discharge Orientation | End |
| Backdraft Damper at Outlet | Included |
| Filter | MERV 11 Disposable |
| Refrigerant | R410A |
| Coil type | Aluminum |
| Power Cable | 8 ft. |
| Drain connection | 3/4" MNPT |
| Warranty | 5 Years on all Parts Including Refrigeration System |
Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.
Humidity and Growth
Humidity control is critical. As a cultivator, you know that. Each stage of growth requires an optimized environment. That’s why we recommend keeping humidity under 60% to prevent mold and mildew, and to help plants get the CO2 they need for efficient photosynthesis.
Vapor Pressure Deficit
For optimal indoor growth, don’t forget about VPD. It’s a measure of the difference between vapor pressure in the leaves of your plants and the air surrounding them. Humidity control in the growth environment helps ensure that plants can “breathe” by taking in moisture and letting it out.
The Anden Impact
Anden dehumidifiers put you in control of your growth environment. You get maximum moisture removal and VPD control, with on-board and remote monitoring capabilities to make it all intuitive. Simply put, these grow-optimized products are designed with your plants in mind.
Anden A130 Installation Options
Cultivation rooms come in all shapes and sizes. This Anden Dehumidifier gives you flexible installation options to ensure maximum effectiveness and optimized conditions.
Suspended - Saves space in any cultivation room
- Uses Model 5691 hanging kit to suspend unit from ceiling
- Pulls in air, dehumidifies, and returns it to the space
- Optimizes humidity, temperature, and CO2 for maximum growth
Moveable (Model A130F Only) - Operates within the cultivation room
- Humid air is pulled into the dehumidifier
- Air is dehumidified and returned to the space
- Optimizes humidity, temperature, and CO2 for maximum growth
Inlet and Outlet Ducted (Model A130F Only) - For rooms with limited space
- Located in a separate room, connected by air ducts to the cultivation room
- Ducted with 10” flex duct or hard pipe
- Optimizes humidity, temperature, and CO2 for maximum growth
Anden Model A77 Dehumidifier Contoller
Accurate Readings, Easy Interface allow you to monitor and adjust the relative humidity of your indoor growth environment with the Anden A77 Digital Dehumidifier Control. This wall-mounted unit lets you dial in relative humidity levels to create a healthy, grow-optimized environment with constant monitoring and easy adjustments. This wall-mounted unit is hardwired to your Anden dehumidifier, giving you accurate readings and easy control without needing to directly access your dehumidifier. The relative humidity level is displayed in bold on the digital screen for easy readings and quick adjustments. Accurate monitoring and precise controls can save you money on energy costs by activating your humidification systems only when they’re needed. The control includes an on/off switch and up/down buttons.
Anden Model A77 Controller Features
Anden Model A77 Controller Spec Table
| Input voltage and current | Voltage: 35VDC (supplied by dehumidifier control board) |
|---|---|
| Control Range | 35%-80% RH |
| Accuracy | +/- 5% RH |
| Differential | 3% RH |
| Low Limit | 40°F Dew Point |
| High Limit | 99°F Dry Bulb |
Anden A130F Spec Table
| Capacity | 130 ppd |
|---|---|
| Energy factor | 2.8 L/kWh - 5.9 pints/kWh |
| Amps | 8.3A |
| Watts | 920 |
| Btu/h | 3,310 |
| Noise | 50dBA Ducted |
|---|---|
| Frequency | 60 Hz |
| Voltage, Phase | 120VAC, 1Phase |
| Dimensions (L x W x H) | 30 1/4" x 19 1/2" x 18 3/4" |
| Weight | 114 lbs |