Electronic optical liquid sensors are durable, have no moving parts and are easy to maintain. SXL sensors can detect fluid levels in tanks, flow in pipes, or leaks in drip pans when liquid touches the sensor tip. Wide voltage range and high current capacity makes the SXL sensor practical for TTL logic, industrial PLC or direct relay control applications. 1/4” NPT threading and removable wiring terminal block with pin-out cast into the hex head makes installation or replacement fast and simple. When the output is energized a red LED illuminates the sensor body giving a visual status indication.
Extensive options available for liquid level sensors from Agrowtek, giving you the freedom you freedom to create your perfect set up.
Sensors and configurations available include:
Sensor Kit Layout
Each kit includes two liquid sensors for high and low “fill” or “drain” control of fluids in tanks, reservoirs, etc. Only power, wire and a valve or relay is required to complete the level control system; no external controller is required. Easy to wire and setup!
SXL-D Drain Sensor Kit
When liquid is above the low sensor (SXL-1, wet-on) its output provides power to the high sensor (SXL-1X, wet-on latching.) When liquid rises above the high sensor, its output latches on. The high sensor’s output is used to power a device (such as a control relay for a pump or valve) until it is reset by the low sensor’s output turning off.
SXL-F Fill Sensor Kit
When liquid is below the high sensor (SXL-2, dry-on) its output provides power to the low sensor (SXL-2X, dry-on latching.) When liquid falls below low sensor, its output latches on. The low sensor’s output is used to power a device (such as a control relay for a pump or valve) until it is reset by the high sensor’s output turning off.
Complete Drain/Fill System Examples
Example Drain System With 120v Single Outlet Relay
Electronic optical “liquid level control system” includes two liquid sensors for high and low control of water with a RX1 outlet relay. Simply install the sensors and wire your kit. The system automatically drains or fills the tank by turning the outlet. No other control system is required!
Example 1" Water Valve System
Electronic optical “liquid level control system” includes two liquid sensors for high and low control of water with a standard water control solenoid valve. Simply install the valve and wire the kit. The system automatically drains or fills the tank by opening and closing the valve; no other control system is required!
How it works
Optional Mounting System
For users who need a way to mount your SXL system, Agrowtek offers a LSM Liquid Sensor Mounting System! This Two-part system for mounting SXL liquid level sensors from the top of a tank providing secure mounting, adjustable sensor heights, and easy installation and removal.
Uses standard 1" PVC pipe to mount the SXL liquid sensors at adjustable depths within a liquid tank. Top mounting avoids holes on the sides of the container to reduce chances of leaks. Learn More Here!
|Max 1A (sourcing)
|20mA per sensor
|-20 to 80°C (non-freezing)
|26 - 16 AWG
Be the first to review this product
Expert Advice Toll-Free
© 2011-2024 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.