GrowControl MCX mini climate controllers combine a SXE environment sensor/controller with a single intelligent relay module to form a simple, autonomous environmental controller for basic applications. The SXE sensor connects directly to the intelligent relay to operate one, four, or up to eight devices independently (depending on the model.)
Control equipment based on temperature, humidity or CO2 (optional) values as well as 24-hour and repeat cycle timers. Set points have day/night values which are selected based on the reading of the light sensor located on the top of the SXE unit, which detects day or night from ambient light levels.
A built-in aspirator fan provides a continuous flow of air over the sensors for the most accurate readings and fastest response to changing conditions. An air filter is included which is removable and washable.
SXE environment sensor’s built-in color display provides an easy to use interface for monitoring the sensor readings and configuring the control settings. Internal data logging memory provides a 120 point graphical history on the screen and the entire 21,600 data point history can be downloaded using the LX1 USB AgrowLINK and free computer software.
The MXC1 & MXC4 systems include relays with 120v outlets for control. The MXC8 features eight relays featuring 8 pairs of open dry contacts.
If you're looking to use an onsite PC, Agrowtek also offers an easy solution for configuration, firmware updates and data logging, and more using the Agrowtek LX1 AgrowLink. When using the LX1, you can connect the MCX to the HX8 8-port hub, which allows the control of multiple sensors and relays directly. Learn more here!
To make sure you set your system up how you truly like and not just how you can get it, Agrowtek systems use standard MODBUS protocalls and can be controlled by MODBUS devises using Agrowtek's LX2 ModLink. You can find the LX2 here!
Each system includes:
ONLY ONE relay device may be connected to the SXE sensor at once. For multiple sensor and relay configurations, Agowtek offers the industry leading GrowControl GXC master controller. When paired with the GrowControl GCX Controller, you gain the ability to control all aspects of your facility's climate and hydroponics systems from the comfort of your own home. Potential problems and issues are sent to you at an instant via text or email too, so you never have to worry! Learn more here!
Up Close With The SXE Controller
The main screen displays the real-time sensor readings from the attached sensors. Each button is labeled at the bottom of the display to describe it’s function on the current screen or menu
Three buttons are located beneath the screen. Each button is labeled at the bottom of the display to describe it’s function in the current screen or menu.
Full color display screen features large, bright green sensor readings for easy visibility, plus a range of functions that can be performed directly from the menus including:
Setting Up the MCX System
Connect the sensor to the relay using the included cross-over ethernet cable as shown in the diagram. (RX4i shown for example)
Important: ONLY use cross-over adapters provided by Agrowtek. Incorrect cross-over adapters or cables can cause damage to the equipment.
The RX1i is meant to be power by plugging into a 120Vac wall outlet. The RX4i can be purchased with a 120Vac wall outlet, if there is no power cord installed on the RX4i, one may be installed (14AWG minimum) or the RX4i may be directly wired to a 15A circuit breaker using standard 1/2” EMT conduit and fittings. The RD8i comes standard with a 24Vdc 12w power supply, alternatively, 12-24Vdc may be supplied to the RD8i via a terminal block inside the unit. Red LED indicator lights turn on when AC power is activated to the receptacles.
Shown in this example is the MCX4. The GrowControl RX4i relay independently operates four receptacles for control of equipment such as: irrigation pumps, CO2 equipment, fans, lighting trigger cords, etc. Connects instantly to Agrowtek's GCX Cultivation Controls or to a SXE sensor via a GrowNET™ port for advanced automated control functions.
LED indicators on the front panel provide status of each outlet. Rugged metal enclosure for wall mounting. Conduit knock-outs and screw terminals for easy electrical installation.
|Max Cable Distance||1000ft|
|Aspirator||6cfm Fan with Foam Filter|
|Temperature Range||-20 - 60°C|
|Temperature Accuracy||±0.2°C typical | ±0.4°C maximum|
|Humidity Range||0-100% RH (non condensing)|
|Humidity Accuracy||±2% 0-80% typical - ±4% maximum|
|Light Irradiance Range||0 - 1000W/m2|
|CO2 Accuracy||±50ppm + 3% of reading|
|4-20mA DAC Resolution||12 bit, 0.005mA|
|Minimum Cycle Time||1 second|
|Interface||RS485 with MODBUS|
|Relay Ratings||1,000,000 cycles|
|Relay Cycle Counters||Up to 4 billion cycles per relay|
|Input Power||110-120VAC, 12A|
|Max Rating||12A per receptacle & combined|
|Receptacle Type||NEMA 5-15|
|Input Power||110-120VAC, 15A|
|Max Rating||15A per receptacle & combined|
|Receptacle Type||NEMA 5-15|
|Input Power||24Vdc, 0.5A max|
|Max Rating||10A per relay|
|Receptacle Type||Screw Terminal, N.O.|
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.