Agrowtek GrowControl MCX Mini Climate Controller

Agrowtek GrowControl MCX Mini Climate Controller

SKU #: AG-MCX

Be the first to review this product

Agrowtek Brand Product
$455.95 - $765.95

Availability: In stock

Lead time: Please select an option below


Overview

Agrowtek Product Documents

MXC1 Specs

This Powerful, Autonomous Set-Point Environmental Controller Offers Climate Control That Is Simple, Economical, & Reliable

GrowControl MCX mini climate controllers combine a SXE environment sensor/controller with a single intelligent relay module to form a simple, autonomous environmental controller for basic applications. The SXE sensor connects directly to the intelligent relay to operate one, four, or up to eight devices independently (depending on the model.)

Control equipment based on temperature, humidity or CO2 (optional) values as well as 24-hour and repeat cycle timers. Set points have day/night values which are selected based on the reading of the light sensor located on the top of the SXE unit, which detects day or night from ambient light levels.

A built-in aspirator fan provides a continuous flow of air over the sensors for the most accurate readings and fastest response to changing conditions. An air filter is included which is removable and washable.

SXE environment sensor’s built-in color display provides an easy to use interface for monitoring the sensor readings and configuring the control settings. Internal data logging memory provides a 120 point graphical history on the screen and the entire 21,600 data point history can be downloaded using the LX1 USB AgrowLINK and free computer software.

The MXC1 & MXC4 systems include relays with 120v outlets for control. The MXC8 features eight relays featuring 8 pairs of open dry contacts.

MCX to LX1

If you're looking to use an onsite PC, Agrowtek also offers an easy solution for configuration, firmware updates and data logging, and more using the Agrowtek LX1 AgrowLink. When using the LX1, you can connect the MCX to the HX8 8-port hub, which allows the control of multiple sensors and relays directly. Learn more here!

To make sure you set your system up how you truly like and not just how you can get it, Agrowtek systems use standard MODBUS protocalls and can be controlled by MODBUS devises using Agrowtek's LX2 ModLink. You can find the LX2 here!

Each system includes:

  • SXE Controller
  • Power Supply (Optional with 4 Unit Relay)
  • 1 or 4 Unit Relay With 120v outlets or an 8 Unit Relay With 8 Dry Contacts
  • Agrowtek Cross Over Adapter
  • OPTIONAL: CO2 Sensor Available (0-10,000 ppm)

ONLY ONE relay device may be connected to the SXE sensor at once. For multiple sensor and relay configurations, Agowtek offers the industry leading GrowControl GXC master controller. When paired with the GrowControl GCX Controller, you gain the ability to control all aspects of your facility's climate and hydroponics systems from the comfort of your own home. Potential problems and issues are sent to you at an instant via text or email too, so you never have to worry! Learn more here!


Up Close With The SXE Controller

The main screen displays the real-time sensor readings from the attached sensors. Each button is labeled at the bottom of the display to describe it’s function on the current screen or menu

SXE Description

Three buttons are located beneath the screen. Each button is labeled at the bottom of the display to describe it’s function in the current screen or menu.

Full color display screen features large, bright green sensor readings for easy visibility, plus a range of functions that can be performed directly from the menus including:

  • High/low history
  • Graphical history
  • Alarm set points
  • Sensor calibration
  • Data logging options

Setting Up the MCX System

Connect the sensor to the relay using the included cross-over ethernet cable as shown in the diagram. (RX4i shown for example)

Important: ONLY use cross-over adapters provided by Agrowtek. Incorrect cross-over adapters or cables can cause damage to the equipment.

SXE Connection to Relay

The RX1i is meant to be power by plugging into a 120Vac wall outlet. The RX4i can be purchased with a 120Vac wall outlet, if there is no power cord installed on the RX4i, one may be installed (14AWG minimum) or the RX4i may be directly wired to a 15A circuit breaker using standard 1/2” EMT conduit and fittings. The RD8i comes standard with a 24Vdc 12w power supply, alternatively, 12-24Vdc may be supplied to the RD8i via a terminal block inside the unit. Red LED indicator lights turn on when AC power is activated to the receptacles.


Typical Configuration

Shown in this example is the MCX4. The GrowControl RX4i relay independently operates four receptacles for control of equipment such as: irrigation pumps, CO2 equipment, fans, lighting trigger cords, etc. Connects instantly to Agrowtek's GCX Cultivation Controls or to a SXE sensor via a GrowNET™ port for advanced automated control functions.

LED indicators on the front panel provide status of each outlet. Rugged metal enclosure for wall mounting. Conduit knock-outs and screw terminals for easy electrical installation.

MCX4 Set Up

Sensor Specifications

SpecificationMeasurement
Power24Vdc, ~5W
Max Cable Distance1000ft
Aspirator6cfm Fan with Foam Filter
Temperature Range-20 - 60°C
Temperature Accuracy±0.2°C typical | ±0.4°C maximum
Humidity Range0-100% RH (non condensing)
Humidity Accuracy±2% 0-80% typical - ±4% maximum
Light Irradiance Range0 - 1000W/m2
Light Accuracy±10%
CO2 Range0-10,000ppm
CO2 Accuracy±50ppm + 3% of reading
4-20mA DAC Resolution 12 bit, 0.005mA
InterfaceGrowNET, MODBUS

Relay Specifications

SpecificationMeasurement
Minimum Cycle Time1 second
InterfaceRS485 with MODBUS
1000ft24Vdc, ~5W
Relay Ratings1,000,000 cycles
Relay Cycle CountersUp to 4 billion cycles per relay

RX1i Specifications

SpecificationMeasurement
Input Power110-120VAC, 12A
Max Rating12A per receptacle & combined
Receptacle TypeNEMA 5-15

RX4i Specifications

SpecificationMeasurement
Input Power110-120VAC, 15A
Max Rating15A per receptacle & combined
Receptacle TypeNEMA 5-15

RD8i Specifications

SpecificationMeasurement
Input Power24Vdc, 0.5A max
Max Rating10A per relay
Receptacle TypeScrew Terminal, N.O.
Reviews
Tech Specs