The new Ai SuperVac 11.3 cfm commercial grade vacuum pumps are now UL/CSA certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. They are also more powerful (1,100kW vs 750W) and corrosion resistant. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.
Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.
It is important to note that pumps should always be ran in a well ventilated area.
Free high capacity exhaust oil mist filter ($250 value), KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.
| Electrical requirements || 115V 60Hz or 230V 50/60Hz, single phase, 1,100 watts |
| Pumping rate || 11.3 cfm (115V 60Hz), 9.3 cfm (230V 50/60Hz) |
| Ultimate vacuum without gas ballast || 0. 3 micron/millitorr |
| Ultimate vacuum with gas ballast || 6 micron/millitorr |
| Inlet/outlet connection || KF25/NW25 flange |
| Oil volume || 1.5 liter / 1.59 quart |
|Motor rate|| 1715 rpm (at 60Hz) or 1440 rpm (at 50Hz) |
|Working temperature||5 to 40¬∞C|
| Unit/shipping dimensions (LxWxH) || 21x7.5x12" / 36x10x17" |
| Unit/shipping weight || 72 Lb / 90 Lb |
|Recommended oil||Ultra-grade 19|
|Noise level||< 58 dB|
| Compliance ||UL (E500328), CSA, CE|
| Ai SuperVac-11C vacuum pump with exhaust oil mist filter || 1 set |
|Ai premium vacuum pump oil||1 pc|
| KF25 flexible stainless steel vacuum bellow (3 ft) || 1 pc |
| KF25 wing nut flange quick clamp || 2 pcs |
| KF25 flange centering ring || 2 pcs |
|User's manual|| 1 pc |
Be the first to review this product
Expert Advice Toll-Free
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.