SST (stainless steel) tubing refers to internal tubing and compression. external tubing not included.
SIntroducing the new UL/CSA certified AccuTemp 3.2. cu ft vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the secondary over-temp protection dial, stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, and two year warranty. With our new internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption.
Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.
IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Across International is not responsible for any loss of material inside of the oven.
Electric | 110V +/-10% 60Hz 1-PH 13.6A, 1,500 watts or 220V +/-10% 50/60Hz 1-PH 6.8A, 1,500 watts |
Heater | 500 watts x 3, built into 3 aluminum shelves, for the fastest, most energy efficient and uniform heating. |
Chamber | Size: 18 x 18 x 18" Material: Stainless steel Capacity: 3.2 cubic feet |
Temperature control | Controller: 3rd gen low proportional gain, microcomputer PID controlled with LCD display Range: ambient to 480°F Display units: Fahrenheit or Celsius Accuracy: +/- 1°F Uniformity: +/- 5% of setpoint Dwelling timer range: 1 to 9999 minutes Warm-up time to 100°F: 35 minutes Warm-up time to 480°F: 60 minutes |
Vacuum | Ultimate vacuum level: better than 500 microns/millitorrs ( may vary based on your altitude) Mechanical gauge range: 0 to 30 inch mercury Vacuum port: KF25 flange x 1 Vent port: 3/8" hose barb Vacuum pump: Sold separately |
Weight | Unit: 260 Lbs, shipping: 400 Lbs |
Dimensions (WxDxH) | Unit: 30.5 x 24 x 29" Shipping: 36 x 33 x 35" |
Shelves | Heated shelves: 3 non-removalbe aluminum shelves, 17.5 x 17.25" (WxD) each Optional stackable aluminum shelves: 17.5 x 17.25 x 2.25" (WxDxH) Total area without stackable shelves: 302 x 3 = 6 sq ft or 906 inch 2 Total area with 3 stackable shelves: 302 x 6 = 12 sq ft or 1812 inch 2 Distance between shelves (without stackable shelves): 4.75 inches Distance between shelves (with 3 stackable shelves): 2.25 inches |
Door gasket material | Silicone or Viton |
Observation window | 1/2" tempered safety glass |
Safety | Built-in circuit breaker Overheat shutoff protection Secondary over-temp protection dial |
In-door lights | White LED (LED lights is optional on all 220V models) |
Warranty | 2 years |
Compliance | UL/CSA (E482564), CE |
Part description | Quantity |
Ai UL/CSA certified AccuTemp 3.2 cu ft vacuum oven | 1 pc |
KF25 quick clamp and centering ring | 1 set |
User's manual | 1 pc |
Be the first to review this product
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.
20.18.4