SST (stainless steel) tubing refers to internal tubing and compression. external tubing not included.
Introducing the new Across International UL/CSA certified AccuTemp 16 cu ft vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the secondary over-temp protection dial, 2.5X larger internal tubing for a quicker vacuum purge and release, and a secondary door handle to provide a better sealing on the door gasket. Come in 110V or 220V and backed by our 2-year warranty.
The AccuTemp-160 series digital vacuum oven features a gigantic 16 cubic feet easy-to-clean stainless steel chamber with a large 3/4" tempered glass safety window. With our new internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption.
Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.
IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Across International is not responsible for any loss of material inside of the oven.
Electrical requirements | 110V +/-10% 60Hz 1-PH 13.6A, 1,500 watts or 220V +/-10% 50/60Hz 1-PH 6.8A, 1,500 watts |
Heating | 250 watts x 6, built into 6 aluminum shelves, for the fastest, most energy efficient and uniform heating. |
Chamber | Dimensions: 25.6 x 30 x 35.5" (WxDxH) Material: Stainless steel Capacity: 16 cubit feet |
Temperature control | Controller: 3rd gen low proportional gain, microcomputer PID controlled with LCD display Range: ambient to 100°C (200°F) Display units: Fahrenheit or Celsius Accuracy: +/- 1°F Uniformity: +/- 5% of setpoint Dwelling timer range: 1 to 9999 minutes |
Vacuum | Ultimate vacuum level: better than 500 microns/millitorrs ( may vary based on your altitude, click here to learn more ) Mechanical vacuum gauge range: 0 to 30 inch mercury Mechanical vacuum gauge type: oil-filled Vacuum port: KF25 flange x 1 Vent port: 5/8" hose barb x 1 Vacuum pump: Sold separately Approximate time to reach full vacuum: With Edwards E2M28 21 cfm pump: 8 minutes With Ai SuperVac 11.3 cfm pump: 11 minutes |
Weight | Unit: 710 Lbs, shipping: 985 Lbs |
Dimensions (WxDxH) | Unit: 33 x 37 x 52" Shipping: 46 x 39 x 60" |
Shelves | H eated shelves: 6 non-removalbe aluminum shelves, 25 x 29.25 inches (WxD) each Optional stackable aluminum shelves: 25 x 29.25 x 2.375 inches (WxDxH) Distance between shelves (without stackable shelves): 5 inches Distance between shelves (with 6 stackable shelves): 2.375 inches Total area without stackable shelves: 731 x 6 = 30 sq ft or 4386 sq inch Total area with 6 stackable shelves: 731 x 12 = 60 sq ft or 8772 sq inch |
Door gasket material | Silicone or Viton |
Observation window | 1/2" tempered safety glass |
Safety | Built-in circuit breaker Overheat shutoff protection Secondary over-temp protection dial |
In-door lights | White LED (pre-installed) |
Compliance | UL/CSA (E482564), CE |
Warranty | 2 years |
Part description | Quantity |
Ai UL/CSA certified AccuTemp 16 cu ft vacuum oven | 1 pc |
KF25 quick clamp and centering ring | 1 set |
User's manual | 1 pc |
Be the first to review this product
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.
20.18.9