Ai C30 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
IMPORTANT! -20¬∞C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).
|Temperature range||Ambient to -30¬∞C (No load)|
| Electrical requirements || 220V 60Hz 1-PH, 1,100 watts (Not compatible with 50Hz power) |
| Cooling capacity |
(Assuming working environment
| @ 32¬∞F/0¬∞C: 1,250W |
@ 14¬∞F/-10¬∞C: 800W
|Compressor|| Make: Panasonic |
Power: 208-230V 60Hz 1-PH
Number of compressor: one
|Recirculating pump|| Type: Centrifugal |
Output: 100 watts
Pumping speed: 20 L/min or 5.3 gallon/min
Maximum head: 20 feet or 6 meter
Maximum pressure: 5.8 psi
|Coolant outlet pressure||Displayed on the built-in mechanical pressure gauge|
| Reservoir || Material: Type 304 stainless steel, polished |
Chilling fluid connection: 3/8" hose barb x 2
Capacity: 10 liters or 2.6 gallons
Type: Digital microprocessor PID controlled
|Temperature sensor type|
|Housing|| Powder coated type 42 stainless steel |
| Recommended coolant || For 50¬∞F/10¬∞C or higher: |
Between 50¬∞F/10¬∞C and -22¬∞F/-30¬∞C:
50% ethylene glycol + 50% distilled water
|Working environment||-15¬∞C/5¬∞F to 25¬∞C/77¬∞F, at <66% humidity|
|Built-in swivel casters|| Four |
| Unit/shipping dimensions || 26.5 x 17 x 27" / 32 x 22 x 36" (WxDxH) |
|Unit/shipping weight|| 155 Lbs / 210 Lbs |
Compressor over-temp protection
|Recommended for rotary evaporators|| Ai 5L SolventVap rotary evaporators |
|Compliance|| UL 61010-1 :2012 Ed.3+R:29Apr2016 |
CSA C22.2#61010-1 :2012 Ed.3
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.