If you think you have to spend thousands of dollars to automate your garden, think again. Here are 9 controllers that can give you piece of mind while saving you money!
This simple controller has two outlets and provides 96 on/off trippers with 15 minute accuracy. It's a great way to control lights, CO2, dehumidifiers and much more. This design makes it very easy to setup and configure. Also, it only takes up one plug of your wall outlet for added convenience. The simple switch on the side allows you to easily go from timer mode to always on when you need it.
This little controller is perfect to reduce fan speed and noise. It features a variable speed dial as well as the ability to switch to full or off mode. It's fuse protected and comes with a built in clamp for mounting or hanging out of the way as well as 31.5" cord to reach fans with sorter cords.
This timer is similar to number 10 but features one (1) minute intervals and up to 8 separate schedules per day. It has a battery back-up feature saves timer settings in case of power failure. The pastic enclosure resists dust and moisture and the unit has a 1 year warranty. Runs pumps, fans, CO2 generators, light movers, ozone generators, etc but is not recommended for use with digital/electronic ballasts.
This power strip comes with 8 outlets; 4 timed & 4 always on. An analog 24 hour mechanical timer with 15 minute intervals. All outlets are protected up to 1000 joules and it features a circuit breaker protected power switch.
This controller is easy to use and versatile too, as it can be utilized with exhaust fans, A/C units & heaters. Change from heating to cooling with just a flip of the switch. The simplicity of this thermostat and its small design make it a useful addition to any grow room. Includes 3' remote sensor with a control range of 50 F-115 F. 15 Amps maximum @ 120VAC.
The Mercury 2 one dial operation makes it convenient and easy to use. The innovative 'fire-up' feature provides full power for your fan upon start up & then slows to the desired fan speed setting on the dial which extends the life of the fan by properly controlling the electrical load. The plastic enclosure protects internal components from dust and moisture.
The user can choose to have different day and night temperature settings which are maintained automatically by the built in photocell. The temperature knobs make it easy to adjust the settings (45°F - 95°F) and provide a quick visual verification of the current set points. The LEDs on the front of the unit will turn on and off to show the user current conditions. The Autopilot APCET is an affordable way to control temperature. This item comes with a three year warranty!
Automatically shuts down lighting and/or other equipment when a high temperature set point is reached. Once turned-off, the unit will run a user selected delay from 0 to 30 minutes before turning back on or will hold restart until manual reset (temperature setback of 5°F or 10°F / 3°C to 5°C). It comes with a 3 year warranty.
Automatically increases or decreases fan speed based on controller set point. Allows user to adjust deadband range to meet gardens requirements. Temperature control range is 55°F to 95°F. Six (6) foot temperature probe is accurate to within 2°F. The plastic enclosure protects internal components from dust and moisture. The controller also features a photocell to sense day and night.
No matter what you are trying to control, we have the controllers that can save you time and energy and get you automated. Let us help take the work out of your grow.
Questions? Call 888-815-9763 or email [email protected].