The Hades 2 controls up to two light banks via your lighting controller trigger cords'!
The Hades 2 is designed to control HID lighting, a recycling timer for pumps or CO2 enrichment and a nighttime output for use with a circulation fan or heater. It can control up to 1200W (600W per outlet) of HID lighting and incorporates an internal temperature sensor, which will automatically shut down your lights if the 'maximum temp setting' is exceeded. It also features a 30 second preset time delay between the 2 lighting outputs, an internal clock with a battery back up and a 'hot start delay' setting that controls the cool down period for your lights in case of power outages.
Product Usage Diagram:
Titan Controls Hades 2: Digital Recycle and Light Timer w/ High Temp Shut-Off Questions & Answers
The Hades 2 has no power?
Verify power source is providing 120 Volts A/C. Reset the circuit breaker on the Hades 2 by turning off the unit, then turn on.
Does the temperature sensor need to be calibrated?
No. The temperature sensor is digital and there is no need for calibration.
My temperature is reading quite high?
Verify that the sensor is not in a location with direct exposure to intense light and that there is air circulating freely around it.