Do you need a custom quote?
Call us today for a custom quote on your order.
Our product specialists are happy to help.
Achieve the highest flow rates from THE MOST EFFICIENT RO SYSTEM ON THE PLANET!
The EvolutionRO1000 is a reverse osmosis water filter unit. It uses water pressure to reverse a natural physical process called osmosis. Water, under pressure, is forced through semi-permeable membrane to filter out minerals and impurities. Treated drinking water goes through the blue line. Minerals and impurities are sent to the drain with RO waste water though the black line. The system includes a replaceable carbon pre-filter and 2 membrane elements. The pre-filter reduces sand, silt, dirt, rust particles, other sediments, chlorine, chloramines, iron and sulfur from the incoming water supply before they enter the RO membrane elements. An optional high capacity pre-filter, the Pre-Evolution, is available to add 2 extra stages of pre-filtration. This will help further reduce the contaminants listed above as well as cut down on filter changes and maintenance of the EvolutionRO1000. An optional De-Ionization post-filter will remove any remaining PPM of TDS in the water after passing through the RO system.
This System Includes
Check out all of the optional add-ons, upgrades and filters for the Hydro Logic Evolution on the "Parts and Related Items" Tab above, including:
Hydro Logic Evolution-RO1000 High Flow RO System, 1000 GPD Videos
Unboxing the Hydro Logic RO1000
Installing a Hydro Logic Booster Pump
Replacing the Carbon Filter:
Replacing the RO Membrane:
Flushing a KDF Carbon filter
Hydro Logic Evolution-RO1000 High Flow RO System, 1000 GPD Questions & Answers
I have well water, what challenges can I expect?
How does reverse osmosis affect pH?
Another reason to question the pH reading is that for any water sample which is very low in TDS it is very hard to obtain an accurate pH value. The worst case of this accuracy problem occurs with de-ionized water but some low TDS RO water will react the same. The sample is so low in minerals that there is no buffer. The slightest absorption or loss of CO2 shifts the pH substantially. The water’s tendency to pick up additional CO2 from the ambient air, even if the test is done on site, can produce a very low false pH.
In reality, measuring the pH of RO water is difficult and not accurate due to lack of any pH buffering the RO water. If the feed water has a lot of dissolved CO2 then pH can drop a few points. But, in the case of a drinking water RO system, a post re-mineralization filter will help neutralize the final product water's pH level. In the case of RO water for horticultural purposes, once you mix a calcium/magnesium supplement into the RO water and then add your nutrients and additives, the final pH can be adjusted and your feed formula should be pH stable.
Why do pH levels come out higher than the source water when running water through a carbon or Carbon/KDF filter?
Can the Evolution RO1000 be used as a drinking water system for my home?
How do I properly store a Reverse Osmosis System that won't be used for more than 3 weeks
How do I know if I have iron in my water?
Great filter Review by RagnarSteve
(Posted on June 27, 2016)
Great price and quality product Review by S_Chev
(Posted on February 9, 2016)