• 888-815-9763 Sales & Support Mon - Fri, 8am - 5pm PST. Instagram Facebook Twitter Google + Youtube



Save Now on Top Brands Like Twister, CenturionPro and Trimpro... Up To $600 off! Shop Now


Bluelab Commercial Truncheon Meter

Item #: 716049

Be the first to review this product

Your Price:

In Stock

In stock items ship within 24 hours
FREE Shipping!

100% Discreet Shipping Price Match Guarantee The HB Difference

Warranties | Returns & Replacements

Commercial Truncheon

Additional Images


When range, durability and accuracy counts!

Big jobs require a big Truncheon! With a conductivity range right up to 6.0 EC (60 CF, 3000 ppm 500 and 4200 ppm 700), it will never leave you short.

The Bluelab Commercial Truncheon Nutrient Meter has been designed for hydroponic crops that require a higher than normal EC or CF requirement during their growing cycle. It’s super tough, fully waterproof, and there is no calibration required or on/off buttons to worry about. It's great for stirring your reservoir too!

Meter length: 40.7cm or 16 1/32 in.

  • Fully waterproof
  • Auto on/off function
  • No calibration required
  • Daylight readable blue LED's
  • No buttons, switches or knobs
  • Provided with EC, CF, ppm 700 and ppm 500 scales
  • 5 year guarantee for Bluelab Commercial Truncheon Meter


Brand Bluelab
SKU 716049
Weight (lb.) 0.5
Height (in.) 1.5
Length (in.) 16.4
Width (in.) 1.5
Warranty Yes
Free Shipping Yes

Bluelab Commercial Truncheon Meter Questions & Answers

My nutrient readings are inaccurate - why?

Possible Reason

  • The probe could be contaminated
  • The temperature of the solution could be very different to the temperature of the probe

Possible Solution

  • Clean the conductivity probe as described in the related article
  • Wait 5 - 10 minutes for the reading to stabilize

My Truncheon Meter measures higher than expected! Why?

There are several explanations for this:

  • Normally a contaminated probe face will cause the Truncheon Meter to measure low. The Truncheon Meter should be cleaned to remove any doubt and to avoid contamination of a conductivity solution. If you have any doubt about the conductivity solution, obtain a fresh one.
  • Allow time for the Truncheon Meter to adjust to the temperature of the standard conductivity solution being measured. When the Truncheon Meter is cooler than the conductivity solution being measured will measure higher than expected. Allow up to approximately 10 minutes for temperature equalisation to take place.
  • The calibration solution may have risen in conductivity or has been contaminated. Leaving the top off a calibration solution for longer than absolutely necessary will cause some of the liquid to evaporate allowing the conductivity of the solution to increase. A dirty Truncheon Meter probe may also introduce contaminants causing the conductivity value to rise. Always ensure your Truncheon Meter has been washed off with plenty of clean tap water and shaken dry before placing in a conductivity solution.

Shipping Info:

Free Shipping

Ships Via FedEx/UPS

Questions about this product?
Contact us for advice or more details. Our product specialists are here to help.
Email an Expert
Report an issue on this page

Why Shop with Hydrobuilder?
We offer the best service and support in the industry. Your complete satisfaction is our goal.